Samsung QE55Q7FNATXXC, QE65Q7FNATXXC manual Detaching the Clean back stand cover from the TV

Preventing the TV from falling

1.Using the appropriate screws, firmly fasten a set of brackets to the

wall. Confirm that the screws are firmly attached to the wall. –– You may need additional material such as wall anchors

depending on the type of wall.

2. Using the appropriately sized screws, firmly fasten a set of brackets to the TV.

––For the screw specifications, refer to the standard screw part in the table under "Mounting the TV on a wall".

3.Connect the brackets fixed to the TV and the brackets fixed to the

wall with a durable, heavy-duty string, and then tie the string tightly. –– Install the TV near the wall so that it does not fall backwards.

–– Connect the string so that the brackets fixed to the wall are at the same height as or lower than the brackets fixed to the TV.

Detaching the Clean back stand cover from the TV

Refer to the following figure to detach the stand cover:

English

English - 11