Samsung SPL330WX/EN, SPL330WVX/EN manual Logo Blue Black, Auto Rgbpc Rgbav YPbPrAV, Usage

Page 33

1)Front-Floor : Normal Image

2)Front-Ceiling : Horizontal/Vertical Reversed Image

3)Rear-Floor : Horizontally Reversed Image

4)Rear-Ceiling : Vertically Reversed Image

Lamp Mode Used to set the image brightness by adjusting the amount of light generated by the lamp.

1)Eco : This mode is optimized for small screens smaller than 100 inches.

This mode decreases the lamp brightness and power consumption in order to extend the lamp lifetime and reduce noise and power consumption.

2)Normal : This mode is optimized for general use. This mode is the recommended mode for a stable lamp brightness that enables a low-noise, comfortable operating environment even under bright ambient illumination.

3)Bright : This mode maximizes the lamp brightness when the ambient illumination is bright. As the brightness of the lamp increases, the lamp lifetime can be reduced and the noise and power consumption may increase.

V-KeystoneWhen the projector image is not displayed vertically on the screen, the image can be calibrated using the V-Keystone function.

H-KeystoneWhen the projector image is not displayed horizontally on the screen, the image can be calibrated using the H-Keystone function.

Refer to 'Adjusting the H-Keystone'

The Keystone, which is a function for calibrating a skewed image, may degrade image quality when it is activated.

Background You can set the Background that is displayed when there is no signal from the external device connected to the projector.If a signal is received, the Background you set disappears and a normal screen is displayed.

1)Logo

2)Blue

3)Black

Test Pattern Generated by the projector itself. Use to optimize the installation of the projector.

1)Crosshatch : You can check whether the picture is distorted or not.

2)Screen Size : You can refer to picture format sizes such as 1.33:1 or 1.78:1.

Video Type If the screen quality is abnormal as a result of the projector not identifying the input signal type automatically in PC or HDMI mode, you can manually set the input signal.

In [PC] mode, this is only enabled if the input signal is AV Timing(D-

Sub).However, for a separate H/V sync., this is only enabled for the 1280 x 720p 59.94 Hz/60 Hz signals.

In [HDMI] mode, this is only enabled for the 640x480p 59.94Hz/60 Hz, 1280x720p 59.94Hz/60 Hz signals from among the AV Timing(HDMI) signals.

1)Auto

2)RGB(PC)

3)RGB(AV)

4)YPbPr(AV)

Eco

Normal

Bright

Crosshatch

Screen

Size

RGB(PC)

Usage

When connecting the RGB output of a PC to the D-Sub terminal

Color,

PC menu and

Sharpness,Tint

zoom

Disabled

Enabled

When connecting the RGB output of an RGB(AV) AV device (STB, DVD, etc…) to the D-

Sub terminal

When connecting the YPbPr output of an YPbPr(AV) AV device (STB, DVD, etc…) to the D-

Enabled

Enable

Enabled

Disabled

PC

Sub terminal

When connecting a PC to the HDMI terminal

Disabled

Enabled

AV

When connecting an AV device (STB,

 

Enabled

Disabled

Image 33
Contents Page Do not use loose power outlets or damaged power cables Insert the power plug firmly so that it does not come looseUnder no circumstances touch the power plug with wet hands Do not plug multiple devices into a single wall outletKeep the power cord away from heaters Unplug the power plug before cleaning the productPlace the product on the ground carefully Do not drop the product while carrying itKeep the product out of children’s reach Do not disassemble, or attempt to fix or modify the product Make sure to place your remote control on a table or desk Product using a soft dry clothCorrect disposal of batteries in this product Europe only Front/Upper Side An optical engine adopting new LCD technologyStand by Blue LED Lamp Blue LED Temp Red LEDUnpacking LED Indications Clearing Indicator ProblemsInformation Classification StateRear Side Power MenuMove Return MuteExit VOLSupported Display Modes PC Timing D-Sub/HDMI ResolutionAV Timing Hdmi AV Timing D-SubFormat AV Timing VIDEO/S-VIDEOPage Select Menu Setup Install Rear-Floor Installing the ProjectorSelect Menu Setup Install Front-Floor Zoom and Focus AdjustmentScreen Size and Projection Distance Leveling with Adjustable FeetVertical YmmDiagonal Width Length Adjusting the H-KeystoneScreen Page Page Connecting a PC using an HDMI/DVI cable Connecting a PC using the D-Sub cableConnecting an External Monitor Connecting an AV device using a D-Sub cable Connecting an HDMI-Compatible DeviceConnecting using a Video/S-Video cable Connecting a component output AV deviceConnecting an External Speaker Page Turning on the projector Turning off the projectorSelecting an input source Screen Adjustment Description Play/StopDescription User Color TemperatureGain SupportedThen perform Fine Adjustment again For the RGB signal of Hdmi modeSettings OffLogo Blue Black Auto Rgbpc Rgbav YPbPrAVUsage Language Menu Option ResetPosition TransparencyBalance 1kHz 100Hz 3kHz 300Hz Time Off 100 200 400 800Off 10 min 20 min 30 min Connecting an External Monitor Connecting an HDMI-Compatible Device Clean the projector using a soft dry cloth To clean the exterior and lens of the projectorTo clean the interior of the projector Lamp ReplacementLamp Replacement Procedure Replacing and Cleaning the FilterPrecautions when replacing the projector filter Location of the ventilation openings Ventilating openingsNorth America Latin AmericaCIS EuropeMiddle East & Africa Asia Pacific
Related manuals
Manual 43 pages 31.66 Kb

SPL330WX/EN, SPL330WVX/EN specifications

The Samsung SPL330WVX/EN and SPL330WX/EN are advanced digital signage displays designed to deliver high-quality visual experiences in a variety of commercial environments. These models are engineered specifically to meet the demands of retail, transportation, and other public venues, ensuring that content can be showcased effectively to attract and engage customers.

One of the standout features of the SPL330 series is its stunning picture quality. With a high resolution and vibrant color reproduction, these displays are capable of portraying intricate details and vivid graphics. The screens utilize advanced LED technology that ensures consistent brightness levels and enhances overall image clarity, making them suitable for both indoor and outdoor settings.

Additionally, the SPL330 displays come equipped with a wide viewing angle, allowing audiences to experience clear visuals from various positions. This feature is particularly beneficial in crowded environments where viewers may not always be directly in front of the screen. The anti-glare coating minimizes reflections, ensuring that content remains visible even in brightly lit areas.

Another notable characteristic of the SPL330WVX/EN and SPL330WX/EN is their robust durability. Built to withstand the rigors of daily use in busy public spaces, these models are designed with reinforced materials, making them resistant to impacts and suitable for high-traffic locations. The displays can operate for extended hours without overheating, making them ideal for 24/7 operation.

In terms of connectivity, both models offer versatile options, including HDMI, DVI, and DisplayPort inputs. This variety allows for easy integration with different media players and content sources, enhancing the flexibility of the display system. Furthermore, the built-in content management capabilities enable users to schedule and control content remotely, streamlining operations and ensuring that the right messages reach the audience at the right time.

The SPL330 series is also energy-efficient, designed to reduce power consumption without compromising performance. This commitment to sustainability helps businesses minimize operational costs while contributing to environmental responsibility.

Overall, the Samsung SPL330WVX/EN and SPL330WX/EN are powerful digital signage solutions that combine high-performance visuals with rugged durability and smart connectivity features. These displays cater to businesses looking to enhance their marketing strategies and engage customers effectively in any commercial setting.