Samsung SPL330WVX/EN manual LED Indications, Information, Clearing Indicator Problems, Measures

Page 10

Power Cable

Remote Control/ 1 Batteries (CR2025)

Cleaning Cloth

(Not available in all locations)

 

 

D-Sub Cable

LED Indications

 

:Light is On

:Light is Blinking

:Light is Off

STAND

LAMP

TEMP

Information

BY

 

 

 

 

If you press the POWER button on the remote control or projector, the screen

 

appears within 30 seconds.

 

 

 

 

 

The projector is in normal operating condition.

 

 

This state appears when the projector is preparing an operation after the POWER button on

 

 

the projector or the remote control has been pressed.

 

 

 

 

The POWER button is pressed to turn off the projector, and the cooling system is in

 

operation to cool off the inside of the projector. (Operates for about 30 seconds.)

 

 

 

 

 

Refer to Action 1 below if the cooling fan inside the projector is not in normal operation

 

 

condition.

 

 

 

 

 

Refer to Action 2 below if the lamp cover protecting the lamp unit is not closed properly.

 

 

 

This indicates that the lens cover does not open completely. Refer to Action 3 below.

 

 

 

This indicates that it has changed to Cooling mode, because the internal temperature of the

 

 

 

projector has increased beyond the maintenance limit.

 

 

 

Refer to Action 4 below.

 

This indicates that the power is turned off automatically because the internal temperature of

 

the projector has increased beyond the operation limit. Refer to Action 5 below

 

 

 

A problem has occurred with the operation of the lamp. Refer to Action 6.

The lifetime of the lamp has expired. Refer to Action 7.

The power for the product is not operating normally. Contact a service center.

Clearing Indicator Problems

Classification State

When the cooling fan

Action 1 system is not in normal operating condition.

When the lamp cover protecting the lamp unit is

Action 2 not properly closed or the sensor system is not in normal operating condition.

Measures

If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact your product provider or our service center.

Check if the screws on the side of the projector are securely tightened. If they are and the indicators are still lit, contact your product distributor or

aservice center.

Open the lens cover completely.

Action 3

The lens cover is not open completely.

If the lens cover is not open completely while operating the projector, both the video and audio are turned off automatically.

If the lens cover remains not completely open for ten minutes, the

Image 10
Contents Page Under no circumstances touch the power plug with wet hands Insert the power plug firmly so that it does not come looseDo not use loose power outlets or damaged power cables Do not plug multiple devices into a single wall outletUnplug the power plug before cleaning the product Keep the power cord away from heatersDo not drop the product while carrying it Place the product on the ground carefullyKeep the product out of children’s reach Do not disassemble, or attempt to fix or modify the product Product using a soft dry cloth Make sure to place your remote control on a table or deskCorrect disposal of batteries in this product Europe only An optical engine adopting new LCD technology Front/Upper SideLamp Blue LED Temp Red LED Stand by Blue LEDUnpacking Information Clearing Indicator ProblemsLED Indications Classification StateRear Side Menu PowerMove Exit MuteReturn VOLResolution Supported Display Modes PC Timing D-Sub/HDMIFormat AV Timing D-SubAV Timing Hdmi AV Timing VIDEO/S-VIDEOPage Select Menu Setup Install Front-Floor Installing the ProjectorSelect Menu Setup Install Rear-Floor Zoom and Focus AdjustmentVertical Leveling with Adjustable FeetScreen Size and Projection Distance YmmAdjusting the H-Keystone Diagonal Width LengthScreen Page Page Connecting a PC using the D-Sub cable Connecting a PC using an HDMI/DVI cableConnecting an External Monitor Connecting an HDMI-Compatible Device Connecting an AV device using a D-Sub cableConnecting a component output AV device Connecting using a Video/S-Video cableConnecting an External Speaker Page Turning off the projector Turning on the projectorSelecting an input source Description Play/Stop Screen AdjustmentDescription Gain Color TemperatureUser SupportedSettings For the RGB signal of Hdmi modeThen perform Fine Adjustment again OffAuto Rgbpc Rgbav YPbPrAV Logo Blue BlackUsage Position ResetLanguage Menu Option TransparencyTime Off 100 200 400 800 Balance 1kHz 100Hz 3kHz 300HzOff 10 min 20 min 30 min Connecting an External Monitor Connecting an HDMI-Compatible Device To clean the interior of the projector To clean the exterior and lens of the projectorClean the projector using a soft dry cloth Lamp ReplacementReplacing and Cleaning the Filter Lamp Replacement ProcedurePrecautions when replacing the projector filter North America Ventilating openingsLocation of the ventilation openings Latin AmericaEurope CISAsia Pacific Middle East & Africa
Related manuals
Manual 43 pages 31.66 Kb

SPL330WX/EN, SPL330WVX/EN specifications

The Samsung SPL330WVX/EN and SPL330WX/EN are advanced digital signage displays designed to deliver high-quality visual experiences in a variety of commercial environments. These models are engineered specifically to meet the demands of retail, transportation, and other public venues, ensuring that content can be showcased effectively to attract and engage customers.

One of the standout features of the SPL330 series is its stunning picture quality. With a high resolution and vibrant color reproduction, these displays are capable of portraying intricate details and vivid graphics. The screens utilize advanced LED technology that ensures consistent brightness levels and enhances overall image clarity, making them suitable for both indoor and outdoor settings.

Additionally, the SPL330 displays come equipped with a wide viewing angle, allowing audiences to experience clear visuals from various positions. This feature is particularly beneficial in crowded environments where viewers may not always be directly in front of the screen. The anti-glare coating minimizes reflections, ensuring that content remains visible even in brightly lit areas.

Another notable characteristic of the SPL330WVX/EN and SPL330WX/EN is their robust durability. Built to withstand the rigors of daily use in busy public spaces, these models are designed with reinforced materials, making them resistant to impacts and suitable for high-traffic locations. The displays can operate for extended hours without overheating, making them ideal for 24/7 operation.

In terms of connectivity, both models offer versatile options, including HDMI, DVI, and DisplayPort inputs. This variety allows for easy integration with different media players and content sources, enhancing the flexibility of the display system. Furthermore, the built-in content management capabilities enable users to schedule and control content remotely, streamlining operations and ensuring that the right messages reach the audience at the right time.

The SPL330 series is also energy-efficient, designed to reduce power consumption without compromising performance. This commitment to sustainability helps businesses minimize operational costs while contributing to environmental responsibility.

Overall, the Samsung SPL330WVX/EN and SPL330WX/EN are powerful digital signage solutions that combine high-performance visuals with rugged durability and smart connectivity features. These displays cater to businesses looking to enhance their marketing strategies and engage customers effectively in any commercial setting.