Samsung SPL330WX/EN, SPL330WVX/EN Lamp Replacement Procedure, Replacing and Cleaning the Filter

Page 39

The projector has been designed so that the projector does not work if the lamp cover is not completely assembled

after a lamp replacement. If the projector does not work properly, please check the operating status of the

indicator LED.

Contains Mercury, Dispose According to Local, State or Federal Laws

Lamp Replacement Procedure

Since the lamp is a high temperature and high voltage product, wait at least one hour from the time that the power cord is disconnected before replacing it.

The lamp is located on the left side of the projector (when looking from the front).

Remove the screw shown in the figure below and than open the cover.

Remove the two (2) screws shown in the figure below.

Hold and pull the lamp handle out of the projector, as shown in the figure below.

Assembling a new lamp is in the reverse order of the disassembly.

Replacing and Cleaning the Filter

Precautions when replacing the projector filter

The filter is located at the bottom of the projector.

Turn off the power of the projector, and then disconnect the power cord after the heat of the projector is cooled sufficiently.

Otherwise, its parts may be damaged due to internal heat. When replacing the filter, dust may occur.

For inquiries on filter purchase, please refer to 'Contact SAMSUNG WORLDWIDE'.

The sequence for replacing or cleaning the filter of the projector.

Turn off the power of the projector, and then disconnect the power cord after the heat of the projector has cooled sufficiently.

Place the product so that its bottom

Replace or clean the filter.

looks upward, and than push and

 

remove the filter cover in the

 

direction of the arrow.

 

*When placing the product with the bottom upwards, make sure to place a soft cloth on the floor to prevent scratches.

When cleaning the filter, use a small vacuum cleaner for computers and small electronics products, or wash it under running water.

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Page Do not plug multiple devices into a single wall outlet Insert the power plug firmly so that it does not come looseDo not use loose power outlets or damaged power cables Under no circumstances touch the power plug with wet handsKeep the power cord away from heaters Unplug the power plug before cleaning the productPlace the product on the ground carefully Do not drop the product while carrying itKeep the product out of children’s reach Do not disassemble, or attempt to fix or modify the product Make sure to place your remote control on a table or desk Product using a soft dry clothCorrect disposal of batteries in this product Europe only Front/Upper Side An optical engine adopting new LCD technologyStand by Blue LED Lamp Blue LED Temp Red LEDUnpacking Classification State Clearing Indicator ProblemsLED Indications InformationRear Side Power MenuMove VOL MuteReturn ExitSupported Display Modes PC Timing D-Sub/HDMI ResolutionAV Timing VIDEO/S-VIDEO AV Timing D-SubAV Timing Hdmi FormatPage Zoom and Focus Adjustment Installing the ProjectorSelect Menu Setup Install Rear-Floor Select Menu Setup Install Front-FloorYmm Leveling with Adjustable FeetScreen Size and Projection Distance VerticalDiagonal Width Length Adjusting the H-KeystoneScreen Page Page Connecting a PC using an HDMI/DVI cable Connecting a PC using the D-Sub cableConnecting an External Monitor Connecting an AV device using a D-Sub cable Connecting an HDMI-Compatible DeviceConnecting using a Video/S-Video cable Connecting a component output AV deviceConnecting an External Speaker Page Turning on the projector Turning off the projectorSelecting an input source Screen Adjustment Description Play/StopDescription Supported Color TemperatureUser GainOff For the RGB signal of Hdmi modeThen perform Fine Adjustment again SettingsLogo Blue Black Auto Rgbpc Rgbav YPbPrAVUsage Transparency ResetLanguage Menu Option PositionBalance 1kHz 100Hz 3kHz 300Hz Time Off 100 200 400 800Off 10 min 20 min 30 min Connecting an External Monitor Connecting an HDMI-Compatible Device Lamp Replacement To clean the exterior and lens of the projectorClean the projector using a soft dry cloth To clean the interior of the projectorLamp Replacement Procedure Replacing and Cleaning the FilterPrecautions when replacing the projector filter Latin America Ventilating openingsLocation of the ventilation openings North AmericaCIS EuropeMiddle East & Africa Asia Pacific
Related manuals
Manual 43 pages 31.66 Kb

SPL330WX/EN, SPL330WVX/EN specifications

The Samsung SPL330WVX/EN and SPL330WX/EN are advanced digital signage displays designed to deliver high-quality visual experiences in a variety of commercial environments. These models are engineered specifically to meet the demands of retail, transportation, and other public venues, ensuring that content can be showcased effectively to attract and engage customers.

One of the standout features of the SPL330 series is its stunning picture quality. With a high resolution and vibrant color reproduction, these displays are capable of portraying intricate details and vivid graphics. The screens utilize advanced LED technology that ensures consistent brightness levels and enhances overall image clarity, making them suitable for both indoor and outdoor settings.

Additionally, the SPL330 displays come equipped with a wide viewing angle, allowing audiences to experience clear visuals from various positions. This feature is particularly beneficial in crowded environments where viewers may not always be directly in front of the screen. The anti-glare coating minimizes reflections, ensuring that content remains visible even in brightly lit areas.

Another notable characteristic of the SPL330WVX/EN and SPL330WX/EN is their robust durability. Built to withstand the rigors of daily use in busy public spaces, these models are designed with reinforced materials, making them resistant to impacts and suitable for high-traffic locations. The displays can operate for extended hours without overheating, making them ideal for 24/7 operation.

In terms of connectivity, both models offer versatile options, including HDMI, DVI, and DisplayPort inputs. This variety allows for easy integration with different media players and content sources, enhancing the flexibility of the display system. Furthermore, the built-in content management capabilities enable users to schedule and control content remotely, streamlining operations and ensuring that the right messages reach the audience at the right time.

The SPL330 series is also energy-efficient, designed to reduce power consumption without compromising performance. This commitment to sustainability helps businesses minimize operational costs while contributing to environmental responsibility.

Overall, the Samsung SPL330WVX/EN and SPL330WX/EN are powerful digital signage solutions that combine high-performance visuals with rugged durability and smart connectivity features. These displays cater to businesses looking to enhance their marketing strategies and engage customers effectively in any commercial setting.
Top Page Image Contents