Manual Installation of USB Driver
If the USB driver has been installed successfully, skip to page 23 on "Using yepp station". Refer to the following procedure only if the USB driver is not installed automatically.
1 Check the device manager. Windows 98,ME:
Control Panel ➝ System ➝ Device Manager
Windows 2000 Professional:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
Windows XP Professional:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
2 Check if there is a device listed with an exclamation point or a question mark (displayed as unknown device or USB device).
3 Double click on the device listed with an exclamation point or a question mark.
Note
●If you are using Windows 2000 and your version of Windows does not recognize the USB driver, please download and install the latest service pack from windowsupdate.microsoft.com
●The installation method may vary depending on the type of PC or operating system. Contact your PC dealer or service center for installation information.
●If errors occur continuously when you install the USB driver, reconnect the USB cable after rebooting your system.
4
5
After selecting the driver, click on [Update Driver].
Select a compatible driver, click on [Next] to finish.
Continued...
18 | 19 |