printing photo images
Setting the number of copies to print
Touch the decrease ( 
) or increase ( 
) tab to select the number of prints.
• If the image moves to the previous or next, the number of copies is reset.
To cancel print setting
Touch the Return ( 
) tab on the screen.
To stop printing after printing starts
The confi rmation screen appears while printing.
Touch “Cancel” on the screen.
PictBridge menu
Setting the date/time imprint option
Touch the Menu ( 
) tab “Date/Time” “Off,” “Date,” “Time,” or “Date & Time” Return ( 
) tab.
To print using the DPOF setting
If the printer is compatible with DPOF, you can use the DPOF setting. page 102
•If the printer is not recognized, or to print again after direct printing with a PictBridge printer, remove the USB cable, select “PictBridge” in the menu again, and then reconnect the cable.
•The date/time imprint option may not be supported by all printers. Check with your printer manufacturer.
The “Date/Time” menu cannot be setup if the printer does not support this option.
•PictBridge™ is a registered trademark of CIPA (Camera & Imaging Products Association), an image transfer standard developed by Canon, Fuji, HP, Olympus, Seiko Epson, and Sony.
•Use the USB cable provided with the HD camcorder.
•Use the AC power adaptor for your HD camcorder during PictBridge direct printing. Turning your HD camcorder off during printing might damage data on the storage media.
•Movie images are not available for printing.
•You can set various printing options depending on the printer. Please refer to the user manual of the printer for details.
•Do not remove USB cable or memory card during printing.
•You may not print photo images recorded on other devices.
1 / 12
100_0001
01
Date/Time
1 / 1
Date/Ti
me
Off
Date
1 / 1 | Time |
Date & Time