USING THE DISPLAY (
) BUTTON
Switching the information display mode
You can switch the information display 
) button.
•Pressing the Display ( 
) button toggles the screen indicators on or off.
•If the HD camcorder has warning information, a warning message will appear even when the screen indicator display is set to off.
USING THE LCD SCREEN
Adjusting the LCD screen
1.Open the LCD screen 90 degrees with your fi nger.
2. Rotate it to the best angle to record or play.
Do not lift the HD camcorder by holding the LCD screen.
WARNING
•
• See page 85 to adjust the brightness of the LCD screen.
Using the touch panel
The touch panel allows you to enjoy playback and recording with a simple touch of your fi nger. Place your hand on the rear side of the LCD screen to support it. Then, touch the items displayed on the screen.
Do not place a protective fi lm on the LCD screen.
WARNING If a fi lm is applied for a long while, strong cohesion on the surface of the
W
Storage Type
Storage Info
screen may cause a malfunction of the touch panel.
•Be careful not to accidentally press the buttons near the LCD panel while using the touch panel.
•The tabs and indicators that appear on the LCD panel depend on the current recording/playback status of your HD camcorder.
T | 1 / 7 Format |
File No.