Storage Media
Symptom | Explanation/Solution |
|
|
| • Insert a memory card into your camcorder properly. page 28 |
Memory card functions are not operable. | • If you use a memory card formatted on a computer, format it again directly on your |
| camcorder. page 82 |
|
|
| • Release the lock on the |
Image cannot be deleted. | • You cannot move or delete the protected images. Release the protection of the |
| image on the device. page 99 |
|
|
| • Release the lock on the |
You cannot format the memory card. | • The memory card is not supported on your camcorder or the card has some |
| problems. |
|
|
| • The file may be corrupted. |
The data file name is not indicated | • The file format is not supported by your HD camcorder. |
correctly. | • Only the file name is displayed if the directory structure complies with the |
| international standard. |
|
|
Adjusting the image during recording
Symptom | Explanation/Solution | |
|
| |
| • Set “Focus” to “Auto.” page 69 | |
| • The recording conditions are not suitable for auto focus. | |
Focus does not adjust automatically. | Adjust the focus manually. page 69 | |
• The lens is dusty on the surface. Clear the lens and check the focus. | ||
| ||
| • Recording is being made in a dark location. | |
| Use a light to brighten the area. | |
|
| |
The image appears too bright or flickering, | • This may occur when you make a recording under a fluorescent sodium or mercury | |
lamp. Cancel “iSCENE” to avoid or minimize this phenomenon. | ||
or changes in color. | ||
page 59 | ||
| ||
|
| |
Image’s color balance is not natural. | • White balance adjustment is required. Adjust to the proper “White Balance.” | |
page 62 | ||
| ||
|
| |
| • This is called the focal plane phenomenon. This is not a malfunction. Because | |
The subject may appear bent when | of the way the image device (CMOS sensor) reads out video signals, the subject | |
passing through the frame quickly. | passing by the frame rapidly may appear to bend, depending on the recording | |
| condition. | |
|
|