Cleaning the Air Cleaner

Washable Filter

Section

Pre-Filter

Cleaning the Washable Filters

Washable Filters are responsible for eliminating fine particles of dust, molds and mites in the air that are as small as 0.5 microns. It also has the function of sterilizing virus or bacteria in the air in your room. You had better clean the Washable Filters every 3 months. The cleaning frequency of the Washable Filters may vary according to the time and place that the air cleaner is operated. Before cleaning the air cleaner, make sure that the power supply is disconnected.

1Open the front panel and pull out the Washable Filter Section.

2Wash the Washable Filter Section under lukewarm tap water.

Note ◆ If the filter is too contaminated, leave it in warm water mixed with neutral detergent for 30 minutes, and brush the contaminants with a soft brush.

◆The Pre-Filter is easy to clean because it can be taken out of the Washable Filter Section and washed separately.

◆Do not wash the filters with salt water. The metal parts can be rusted.

3Leave the Washable Filter Section in the shade to dry for over 12 hours.

Note During this process, make sure that the filter is not exposed to direct sunlight because the sun's rays may affect the transformation of the filter case.

4Put the Washable Filter Section back into the place and assemble the front panel.

Cleaning the External Surface of the Air Cleaner

1Clean the external surface of the air cleaner with a damp soft cloth and neutral detergent.

Note Do NOT use benzene, solvents or other chemicals.

E-12