Selecting the Auto Mode
In the Auto mode, the air cleaner operates according to the contamination level.
In this mode, the optimum fan speed is adjusted automatically and the Anion function is selected automatically.
1If necessary, press the 
(Power) button.
Result: ◆ The air cleaner runs in the Auto mode. ◆ The air cleaner makes a ringing sound.
2If the 
is not displayed on the control part, select the Auto mode by
pressing the 
button until it is displayed on the control part of the air cleaner.
Result: ◆ The air cleaner beeps.
◆ The air cleaner operates in the Auto mode.
Note You can change modes at any time.
3 To adjust the Anion function, refer to page 11.