Samsung DVD-R135/HAC manual Setting up the Audio Options, Audio setup menu will be displayed

Setting up the Audio

Options

You can connect the DVD Recorder to an external amp or Home Theatre.

Allow you to setup the Audio device and sound status depending on the audio system in use.

4 Press the …† buttons to select the desired audio option, then press the OK or √ button.

DVD-Recorder			Audio
No Disc
Programme	Digital Output	PCM
Setup	DTS	Bitstream
	Dynamic Compression : On		√
	NICAM	: On	√
MOVE	OK	RETURN	EXIT

1 With the DVD Recorder in Stop mode/No

Disc mode, press the MENU button.

DVD-Recorder Programme

No Disc

Programme Scheduled Record List√

Setup

5 Press the …† buttons to select the desired item, then press the OK or √ button.

■ Press the RETURN or œ button to return

System Setup

MOVE OK RETURN EXIT

NOTE

to the previous menu.

Press the MENU button to exit the menu.

2 Press the …† buttons to select Setup, then press the OK or √ button.

DVD-Recorder			Setup
No Disc
Programme	System		√
Setup	Clock Set		√
	Language		√
	Audio		√
	Video		√
	Parental Control		√
	Install		√
MOVE	OK	RETURN	EXIT

3 Press the …† buttons to select Audio, then press the OK or √ button.

Audio setup menu will be displayed.

Audio Options

Digital Output

1.PCM : Select this when you have no equipment that can decode Dolby Digital (or MPEG-2) signal. When you play Dolby Digital (or MPEG-2) sound track, the digital output are converted to PCM Stereo.

2.Bitstream : Output Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifier have Dolby Digital (or MPEG-2) Decoder.

■ Digital output setting is equally applied to

DVD-Recorder			Audio
No Disc
Programme	Digital Output	: PCM	√
Setup	DTS	: Off	√

NOTE

both Dolby Digital and MPEG-2 audio. LPCM sound track is always outputted as PCM. It has no relation with Digital Output setting.

	Dynamic Compression : On		√
	NICAM	: On	√
MOVE	OK	RETURN	EXIT

■Be sure to select the correct Digital Output or you will hear no sound or loud noise.

DTS

1. Off : Doesn’t output DTS signal.

Select this when your AV receiver or AV amplifier does not have DTS decoder.

2.On : Outputs DTS Bitstream via digital output when you play DTS track.

Select this only when your AV receiver (or AV amplifier) have DTS decoder.

■ When DTS soundtrack is played, sound

NOTE does not output from AV Audio Output.

30- English