Samsung DVD-R135/UMG, DVD-R135/HAC manual Setting up the Progressive scan, Dynamic Compression

Page 31

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

1.On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

2.Off : You can enjoy the movie with the standard Dynamic Range.

NICAM

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.

1.On : NICAM mode

2.Off : Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.

Setting up the Progressive scan

If the TV supports Progressive Scan, press the P.SCAN button on the front of the DVD Recorder to enjoy.

1 With the DVD Recorder in Stop mode, press the P.SCAN button on the front of the DVD Recorder.

The message “Press [Yes] to confirm Progressive scan mode. Otherwise press [No]” will appear.

Press [Yes] to confirm Progressive scan mode.

Otherwise press [No]

Yes No

2 Press the œ √ buttons to select Yes, and then press the OK button.

3 Set your TV to Progressive input (using the TV remote control.)

System Setup

NOTE

■ When the HDMI cable is connected, this screen is not displayed.

■Do not press the P.SCAN button if you are using a TV that does not support Progressive mode. Nothing will be displayed on the screen if pressed.

■Progressive setting is only available when the DVD Recorder is connected to your TV using component cables.

■If the P.SCAN button on the DVD recorder’s front panel is pressed during playback, the prohibition mark() appears on the screen.

■Progressive setting is only available when the DVD recorder is in stop mode.

English -31

Image 31

Contents DVD-R135 Getting Started EnglishHandling Cautions PrecautionImportant Safety Instructions Maintenance of CabinetDisc Storage Disc SpecificationsUsing CD-R/-RW Using MPEG4 discDo not use the following discs DVD-RW VR modeDVD-RW Video mode Reverse engineering or disassembly is prohibitedContents Making a One Touch Recording OTR Flexible Recording for Timer recording onlyRecording the current TV programme you are Recording from external equipment you areGeneral Features Format the disc to start recording Before reading the user’sManual Recorder Select the disc typeCreating a playlist DVD-RW in VR mode When using a DVD-RW disc in VR ModeWhen using a DVD-RW disc in Video Mode When using a DVD-R discUnpacking AccessoriesPreparing the Remote Control Setting the Remote ControlControllable TV Codes Front Panel DescriptionFront Panel Display Video OUTgood video quality Connect the output of external equipment using audio cablesRear Panel RF in / RF OUT Connects antenna cablesTour of the Remote Control Quick Overview Connecting the DVD Recorder to other externalComponents and required initial setting modes Connecting the DVD RecorderVideo, Component video and Progressive Output Modes Connecting the DVDRF cable connection of this DVD Case 2 Connecting to an S-Video output jack Case 1 Connecting to a Video Composite output jackIf your TV has audio input jacks, use this connection Case 3 Component Video output jacksComponent jacks will not output See pages 21 Case 2 Connecting to a stereo amplifier with AV output jacks With DVI Jack Connecting HDMI/DVI to aCase 1 Connecting to a TV with Hdmi Jack Case 2 Connecting to a TVIf the input is not selected automatically Connecting to AV 2 IN, DV input jackCase 2 Connecting a Camcorder to the DV in jack Case 2 Connecting a Camcorder to the DV in jackOn-screen Menu Press again to exit the on-screen Menu On-Screen Menu NavigationAuto Channel scan will be started Plug & Auto Set upConnect the RF cable as indicated on Plug the DVD Recorder into the mainsPress the OK button, then the date and time will be saved Setting the ClockIf you want to exit, press the Menu button Press the OK button to stop the Auto SetupPress the OK button to continue Channel scan will be startedEdit You can add or edit PRprogramme Setting up the Language OptionsCH Tune the channel using œ √ buttons Language setup menu will be displayedTo the previous menu Press the Menu button to exit the menu EP Mode Time SettingPress the Return or œ button to return System menu will be displayedPress the …† buttons to select Chapter Automatic Chapter CreationWith the DVD Recorder in Stop mode, press the Menu button Press the œ √ buttons to select Yes and press the OK buttonAudio Options Setting up the Audio OptionsAudio setup menu will be displayed Off Doesn’t output DTS signalOff You can enjoy the movie with the standard Dynamic Range Setting up the Progressive scanThis is only active when a Dolby Digital signal is detected Dynamic CompressionIf you press the P.SCAN button by Canceling the Progressive scanThis function allows you to setup the TV screen settings Video setup menu will be displayedTV Aspect HDMI/DVI ResolutionDisplayVideo Options Output selection‘Create the password’ message will be displayed DivXR Registration Setting up the Parental ControlIf you forgot your password Press the OK or √ button to select PasswordAbout the Rating Level About the Change PasswordPress the …† buttons to select Change Password See page 34 if you forgot your passwordRecordable discs Before RecordingCompatibility between Samsung and Other Company’s Recorder Unrecordable video Recording ModeDVD-RWVR mode Recording FormatsPress the OPEN/CLOSE button to close the disc tray Recording the current TV programme you are watchingAbout Info Button Checking the available disc space Disc InformationPress the REC button Front panel display changes in the following sequence Recording from external equipment you are watchingCopying from a Camcorder TV Programme 1 to Making a One Touch Recording OTRPress the Stop button once more to stop recording Speed Recording Mode Making a Timer RecordingWith the DVD Recorder in Stop mode, press the Timer button Set timer recording optionIf the timer settings overlap Flexible Recording For Timer recording onlyPress the OK button Selected entry will be deleted from the list Press the OK button to confirm the edited settingRecording the Standard Timer List Discs that cannot be played Before PlayingRegion code DVD-Video only Disc types that can be playedPress the Stop button to stop playback Playing a DiscSearching through a Chapter or Track Using the Disc Menu & Title MenuUsing the Search Functions Button on the remote controlAbout Anykey Moving to a scene directly using the AnykeySlow Motion Play Step Motion PlayPress the …† buttons to select Time Using the Repeat FunctionUsing the Repeat button Playing RepeatedlyRepeat PlaybackUnfinalised DVD-RW Video mode do not repeat a chapter Using the Anykey buttonRepeat playback of the A-B section starts Selecting the Audio language Using the Subtitle buttonUsing the Audio button Selecting the SubtitleOr pause Changing the Camera Angle Zooming-InPlaying back a bookmark Using BookmarksClearing a bookmark Playing back a Marker Using MarkersClearing a Marker Audio CDCD-DA Screen Elements Playing an Audio CD/MP3Playing an Audio CD CD-DA/MP3 Playing an Audio CDCD-DAMP3 Screen Elements Playing an MP3 DiscInsert an MP3 Disc into the disc tray Buttons on the Remote Control used for MP3 playback For MP3 discs, you can select Track, Folder or Disc Play Option ModeTo Programme Tracks Playing a PictureReturns to the Album screen When MPEG4 file is played, you can use following functionsPlaying a MPEG4 Insert a MPEG4 Disc into the disc trayPress the Menu button Using the Title List buttonUsing the Menu button Playing the Title ListEdit menu is displayed on the right Title List screen is displayedSelected entry title will be played back Limited editing function Title List Screen ElementsTitle List Disc ManagerPlaylist Rename screen is displayed Using the Menu buttonBasic Editing Title List RenamingLabeling a TitleDeleting a Title LockingProtecting a TitleYou will be prompted with a confirmation message Deleting a Section of a TitleEdit Title List screen is display Edit Title List Screen Elements Press the OK button at the starting pointOK button Press the OK button at the end pointTo return to Edit Playlist menu Creating a PlaylistPress the OK button at the start point To make a new playlistAPR/23/2006 Title Playing Entries in the PlaylistRenaming a Playlist Entry Enter the desired characters using the …† œ √ buttonsPlaylist entry to be played is selected Editing a Scene for the PlaylistPlaying a Selected Scene Edit Scene screen is displayedModify Scene screen is displayed To setup, follow steps 1 to 3Press the OK button at the start point of the scene Press the OK button at the end point of the scenePress the OK button at the starting point of the scene Adding a SceneSelected scene is moved to the selected position Deleting a Scene Using the Play List buttonTo setup, follow the steps 1 to 3 Copying a Playlist Entry to the PlaylistDeleting a Playlist Entry from the Playlist Using the Playlist buttonYou can create up to 999 scenes on one Editing the Disc Name Disc ManagerFormatting a Disc Disc ProtectionAll title lists are deleted Delete All Title ListsDisc is finalised Finalising a discDVD-RW can be finalised or unfinalised in VR mode Unfinalising a disc V/VR modeCannot record TV programmes TroubleshootingPower RecordingPlayback Play mode settings are different from the settingsVideo Sound Timer RecordingForgot my password for parental supervision Remote ControlOther Specifications Region Country Customer Care Centre Web Site English

Related manuals

Manual 180 pages 57.47 Kb