Select a Proper Location

Installation

Upon removing the air conditioning unit from the box, check for any signs of shipping damage or missing parts (refer to parts list on page 2). If you notice signs of damage or missing parts, do not try to operate the unit. Visit www.tripplite.com/support for service.

Install your portable air conditioner on a flat, level surface with rear and vented sides not less than 20 inches (50 cm) from walls or other obstacles (see diagram). Be sure to install the unit close to a properly grounded outlet. Also be sure the unit is placed near enough to a window, or in a convenient spot for Window/Drop Ceiling installation. Wall outlet should have a power supply consistent with that of the printed tag on the air conditioning unit, 90-110% of its rated voltage.

Note: Do not use an extension cord to plug in the unit. This appliance should be installed in accordance with national and local wiring regulations.

More than 20”
	(50 cm)
More than 20”	WALL
(50 cm)

Installing Standard, Louvered

Air/Ducted Cooling Vents

To remove, hold the upper portion of the selected vent (Standard, Louvered Air Vent for room cooling, Ducted Cooling Vent for ducted cooling), pull it outwards and upwards toward you. To install or replace, position the vent into the slot, and snap it down into place.

	Exhaust/Cooling Duct
	Mounting Instructions
	Affix one end of the duct (longer tube) to
	the Warm Air Exhaust Vent on the back	1
	panel of the unit. Pushing inward, turn the	1
	panel of the unit. Pushing inward, turn the
	duct clockwise into the outlet as seen in the	2
	diagram, being sure the duct is connected	2
	diagram, being sure the duct is connected
	solidly. Connect the Duct Adapter to the other
	side of the duct in the same manner. You are
	now ready for Window/Drop Ceiling Kit
	installation described in the next section.

For Ducted Cooling

Attach Ducted Cooling Vent to the unit’s Main Air Outlet. Affix one end of the duct (shorter tube) to the Ducted Cooling Vent by pushing downwards and turning the duct clockwise into the vent as seen in the diagram, being sure the duct is connected solidly. The other end of the duct can now be placed in

a specific location for isolated cooling, such as in a wiring closet or attached to a rack configuration.

SRCOOL12K, SRXCOOL12K specifications

The Tripp Lite SRXCOOL12K and SRCOOL12K portable air conditioners are designed for those seeking an efficient cooling solution for small to medium-sized spaces. These units are particularly popular in server rooms, offices, and other environments where heat output can be an issue. Both models share several key features and characteristics that make them stand out in the portable cooling market.

One of the main features of the Tripp Lite SRXCOOL12K is its powerful cooling capability. With a cooling capacity of 12,000 BTU, the unit can effectively cool areas up to 400 square feet. This makes it suitable for a variety of applications, from temporary cooling in commercial settings to long-term solutions for home offices or server equipment. The unit also operates quietly, which is beneficial for environments where distractions need to be minimized.

The SRXCOOL12K and SRCOOL12K both utilize advanced technologies that enhance their performance and ease of use. The self-evaporative design allows for efficient cooling while minimizing the need for manual drainage. The units can drain moisture as water vapor, reducing the frequency of maintenance and ensuring consistent performance. This technology helps maintain compact size and mobility while keeping energy consumption in check.

Convenience is another significant characteristic of these models. The included remote control allows users to adjust settings from a distance, providing added flexibility. With multiple cooling settings and fan speeds, users can customize their cooling experience according to their specific needs or preferences. Moreover, the energy-saving mode is particularly useful for those looking to reduce electricity costs while still enjoying a comfortable environment.

The Tripp Lite SRXCOOL12K and SRCOOL12K are also designed with user-friendly installation in mind. Their compact and portable designs make them easy to move between rooms or locations, and the included window installation kit facilitates straightforward setup in various window types.

In summary, the Tripp Lite SRXCOOL12K and SRCOOL12K offer an effective solution for cooling needs with their robust cooling capacities, self-evaporative technology, and user-friendly features. Ideal for both commercial and residential applications, these portable air conditioners provide dependable performance, convenience, and energy-efficiency for any space that requires reliable cooling.