Tripp Lite SRCOOL12K Dealing with Condensation, Cleaning the Air Filters, Cleaning the Cabinet

Page 7

Operation

Dealing with Condensation

Over time, condensation will form when the SRCOOL12K/SRXCOOL12K is in Cool or Dehumidify Modes. This unit offers a built-in evaporator that takes this condensation and re- evaporates it back into the hot exhaust stream. The unit contains no user-removable tank that requires emptying.

A Drainage Outlet on the side of the unit exists for those wanting a dedicated drainage system instead of re-evaporation. Simply connect a draining tube to the Drainage Outlet and run the tube to your facility’s drainage receptacle.

For those opting to use a dedicated drainage system, if the drainage system becomes clogged, there is a small internal reservoir that will collect the water until the system is cleared. If not cleared in time or if the reservoir fills, the unit will automatically shut down.

Before implementing a dedicated drainage system, be sure the power is off and the unit is unplugged! Failure to heed this warning may result in electrical shock!

Drainage Outlet

General Maintenance

The SRCOOL12K/SRXCOOL12K has been designed to give you many years of dependable service. It is important, however, to care for the unit and practice routine maintenance procedures to insure proper and efficient functioning.

Cleaning the Air Filters

It is important to keep the air filters clean and free of dust. When the filters become dirty or covered in dust, it decreases the cooling effect and can threaten air quality. Tripp Lite recommends cleaning the filters at least once every two weeks.

Before cleaning the air filters, turn the unit off and be sure it is unplugged! Failure to heed this warning may result in electrical shock or other personal injury!

1.Slide out the Air Filter Covers as seen in the diagram.

2.Remove the air filters and wash it in warm water with a neutral detergent. DO NOT put the filters into a dishwasher or use harsh detergents or chemicals. Let the filters air dry completely. Note: DO NOT use hot water over 104°F (40°C) to clean the filters.

3. Replace the filters and slide the Air Filter Covers back into their original position. You are now ready to replace the unit to its original location and resume normal use.

Cleaning the Cabinet

It is recommended that the cabinet be cleaned periodically to avoid excess dust build up.

Before cleaning the cabinet, turn the unit off and be sure it is unplugged! Failure to heed this warning may result in electrical shock or other personal injury!

1.Wipe down the unit with a dry, non-abrasive cloth. Do not use gasoline, benzene, thinners or other harsh chemicals as this can seriously damage the surface. Never pour water directly over the unit or into the working parts. This will cause deterioration of electrical components, wiring insulation and poses a threat of electrical shock.

2.In extreme cases, wipe down the unit with a damp cloth to remove residue.

7

Image 7
Contents SRXCOOL12K 230V, 50 Hz Portable Air Conditioning Unit Connection Warnings Maintenance WarningsIntroduction Location WarningsControl Panel Front ViewFor Ducted Cooling Installing Standard, Louvered Air/Ducted Cooling VentsSelect a Proper Location Exhaust/Cooling Duct Mounting InstructionsDrop Ceiling Installation Window Kit InstallationTimer Off PowerTimer Timer OnCleaning the Cabinet Cleaning the Air FiltersDealing with Condensation Service Storage and ServiceStorage
Related manuals
Manual 40 pages 8.66 Kb

SRCOOL12K, SRXCOOL12K specifications

The Tripp Lite SRXCOOL12K and SRCOOL12K portable air conditioners are designed for those seeking an efficient cooling solution for small to medium-sized spaces. These units are particularly popular in server rooms, offices, and other environments where heat output can be an issue. Both models share several key features and characteristics that make them stand out in the portable cooling market.

One of the main features of the Tripp Lite SRXCOOL12K is its powerful cooling capability. With a cooling capacity of 12,000 BTU, the unit can effectively cool areas up to 400 square feet. This makes it suitable for a variety of applications, from temporary cooling in commercial settings to long-term solutions for home offices or server equipment. The unit also operates quietly, which is beneficial for environments where distractions need to be minimized.

The SRXCOOL12K and SRCOOL12K both utilize advanced technologies that enhance their performance and ease of use. The self-evaporative design allows for efficient cooling while minimizing the need for manual drainage. The units can drain moisture as water vapor, reducing the frequency of maintenance and ensuring consistent performance. This technology helps maintain compact size and mobility while keeping energy consumption in check.

Convenience is another significant characteristic of these models. The included remote control allows users to adjust settings from a distance, providing added flexibility. With multiple cooling settings and fan speeds, users can customize their cooling experience according to their specific needs or preferences. Moreover, the energy-saving mode is particularly useful for those looking to reduce electricity costs while still enjoying a comfortable environment.

The Tripp Lite SRXCOOL12K and SRCOOL12K are also designed with user-friendly installation in mind. Their compact and portable designs make them easy to move between rooms or locations, and the included window installation kit facilitates straightforward setup in various window types.

In summary, the Tripp Lite SRXCOOL12K and SRCOOL12K offer an effective solution for cooling needs with their robust cooling capacities, self-evaporative technology, and user-friendly features. Ideal for both commercial and residential applications, these portable air conditioners provide dependable performance, convenience, and energy-efficiency for any space that requires reliable cooling.