Window Kit Installation

Installation

Your portable air conditioner’s Window/Drop Ceiling Kit has been designed to fit most standard vertical and horizontal window applications. It may be necessary to modify some aspects of the installation process for certain types of windows. In both typical and modified installations, the user must determine the fitness of hardware and procedures before mounting. The procedures described in this manual are for common window types and may not be appropriate for all applications.

The Window/Drop Ceiling Kit’s Adapter Board can accommodate a minimum window opening of 26.57 inches (67.5 cm) and a maximum of 49.21 inches (125 cm).

1.Measure your window’s opening and adjust the Adapter Board accordingly. When the correct measurement is determined, lock the board in place using the supplied nut and bolt (see Figure A).

2.Attach the Exhaust/Cooling Duct with the Duct Adapter into the oblong hole in the Window/ Drop Ceiling Kit’s Adapter Board. The adapter will snap into place.

3.Insert the Window/Drop Ceiling Kit’s Adapter Board into your window’s opening as seen in Figure B or C. Vertical or horizontal mounting will depend on your application.

4.Simply close the window appropriately, providing a tight seal against the Window Kit’s

Adapter Board. A tight seal will ensure the unit’s efficiency.

Drop Ceiling Installation

It may be necessary to modify some aspects of the installation process for certain types of ceilings. In both typical and modified installations, the user must determine the fitness of hardware and procedures before installing. The procedures described in this manual may not be appropriate for all applications.

1.Measure the dimensions of your ceiling grid and adjust the Adapter Board accordingly. The Adapter Board should measure slightly longer than the spacing in the grid so that it may rest directly on top of the grid panels. When the correct measurement is determined, lock the board in place using the supplied nut and bolt (see Figure A.)

2.Attach the Exhaust/Cooling Duct with the Duct Adapter into the oblong hole in the Window/ Drop Ceiling Kit’s Adapter Board. The adapter will snap into place.

3.Slide your ceiling tile out of the way and place the Adapter Board inside the ceiling space, on top of the grid panels as seen in the diagram. Note: There should be at least 10 to 15 inches of space above the Exhaust/Cooling Duct so that the duct is not blocked.

4.Slide your ceiling tile back into place as far as it will go. Be sure to slide the tile back as far as it can go to ensure the unit’s efficiency.

Note: The Exhaust Duct (longer tube) can be stretched to a maximum length of 118 inches (300 cm). It is better to keep the duct’s length to a minimum. Excessive stretching or bending of the duct will affect cooling efficiency.

Nut	Figure A
Nut	Figure A
Bolt
Bolt

Horizontal Window

	Horizontal Window	Figure B
	Horizontal Window	Figure B
		Figure B

Window slide kit

minimum: 26.57 in. (67.5 cm)

maximum: 49.21 in. (125 cm) Window slide kit

minimum: 26.57 in. (67.5 cm)

maximum: 49.21 in. (125 cm)

Figure C

Vertical

Window

Window slide kit

minimum: 26.57 in. (67.5 cm)

maximum: 49.21 in. (125 cm)

	Install sliding	Slide ceiling tile
	board above	Slide ceiling tile
	board above
	ceiling grid

INCORRECT CORRECT

SRCOOL12K, SRXCOOL12K specifications

The Tripp Lite SRXCOOL12K and SRCOOL12K portable air conditioners are designed for those seeking an efficient cooling solution for small to medium-sized spaces. These units are particularly popular in server rooms, offices, and other environments where heat output can be an issue. Both models share several key features and characteristics that make them stand out in the portable cooling market.

One of the main features of the Tripp Lite SRXCOOL12K is its powerful cooling capability. With a cooling capacity of 12,000 BTU, the unit can effectively cool areas up to 400 square feet. This makes it suitable for a variety of applications, from temporary cooling in commercial settings to long-term solutions for home offices or server equipment. The unit also operates quietly, which is beneficial for environments where distractions need to be minimized.

The SRXCOOL12K and SRCOOL12K both utilize advanced technologies that enhance their performance and ease of use. The self-evaporative design allows for efficient cooling while minimizing the need for manual drainage. The units can drain moisture as water vapor, reducing the frequency of maintenance and ensuring consistent performance. This technology helps maintain compact size and mobility while keeping energy consumption in check.

Convenience is another significant characteristic of these models. The included remote control allows users to adjust settings from a distance, providing added flexibility. With multiple cooling settings and fan speeds, users can customize their cooling experience according to their specific needs or preferences. Moreover, the energy-saving mode is particularly useful for those looking to reduce electricity costs while still enjoying a comfortable environment.

The Tripp Lite SRXCOOL12K and SRCOOL12K are also designed with user-friendly installation in mind. Their compact and portable designs make them easy to move between rooms or locations, and the included window installation kit facilitates straightforward setup in various window types.

In summary, the Tripp Lite SRXCOOL12K and SRCOOL12K offer an effective solution for cooling needs with their robust cooling capacities, self-evaporative technology, and user-friendly features. Ideal for both commercial and residential applications, these portable air conditioners provide dependable performance, convenience, and energy-efficiency for any space that requires reliable cooling.