Icon Description
Signal strength
GPRS network connected
EDGE network connected
Call in progress
Call diverting activated
SOS message feature activated
Icon Description
Roaming (outside of normal service area)
Bluetooth activated
Wi-Fi AP activated
New text message (SMS)
New multimedia message (MMS)
New email message
New voice mail
1.Remove the back cover and insert the SIM card. Back cover
SIM card
2.Insert the battery and replace the back cover. Battery 
If the battery is completely discharged, you cannot turn on the device, even with the travel adapter connected. Allow a depleted battery to charge for a few minutes before you try to turn on the device.
1. Plug a travel adapter. | 2. When charging is |
| finished, unplug the |
| travel adapter. |
To AC power outlet
Your phone accepts microSD™ or microSDHC™ memory cards up to 16 GB (depending on memory card manufacturer and type).
•Formatting the memory card on a PC may cause incompatibility with your phone. Format the memory card only on the phone.
•Frequent writing and erasing of data will shorten the lifespan of memory cards.
1.Remove the back cover.
2.Insert a memory card with the gold-coloured contacts facing down.
Caution: situations that could cause damage to your phone or other equipment
Note: notes, usage tips, or additional information
Followed by: the order of options or menus you
must select to perform a step; for example: In
→Menu mode, select Messages → Create message (represents Messages, followed by Create message)
[ ] | Square brackets: phone keys; for example: [ | ] |
(represents the End key) | |
| |
| | |
Alarm activated
Connecting to secured web page
Connected to PC
FM radio on
FM radio suspended
Music playback in progress
Music playback paused
message
Memory card inserted
Normal profile activated
Silent profile activated
Battery power level
Current time
•While the phone is charging, the touch screen may not function due to an unstable power supply. If this happens, unplug the travel adapter from the phone.
•Do not remove the battery before removing the travel adapter. Doing this may cause damage to the phone.
•To save energy, unplug the travel adapter when not in use. The travel adapter does not have a power switch, so you must unplug the travel adapter from the outlet when not in use to avoid wasting power. The travel adapter should remain close to the socket when in use.
Memory card
3.Push the memory card in the memory card slot until it locks in place.
4.Replace the back cover.
Use the touch screen
Learn basic actions to use the touch screen.
To avoid scratching the touch screen, do not use sharp tools.
•For the optimal use of the touch screen, remove the protection film before using your phone.
•Your touch screen has a layer that detects small electrical charges emitted by the human body. For best performance, tap the touch screen with your fingertip. The touch screen will not react to touches of sharp tools, such as a stylus or pen.
•Tap: Touch once to select or launch a menu, option, or application.
•Tap and hold: Tap an item and hold it for more than 2 seconds.
•Drag: Tap and drag your finger up, down, left, or right to move to items on lists.
•Drag and drop: Tap and hold your finger on an item, and then drag your finger to move the item.
Turn your phone on or off
To turn your phone on,
1.Press and hold the Power key.
2.Enter your PIN and select OK (if necessary).
3.When the setup wizard opens, customise your phone as desired by following the screen.
If the battery remains fully discharged or removed from the device, the time and date will be reset.
To turn your phone off, repeat step 1 above.
Access menus
To access your phone’s menus,
1.In Idle mode, select Menu to access Menu mode.
2.Scroll left or right to a main menu screen.
3.Select a menu or application.
4. Press the Back key to move up one level; Press [ | ] to |
return to Idle mode. | |
•When you access a menu requiring the PIN2, you must enter the PIN2 supplied with the SIM card. For details, contact your service provider.
•Samsung is not responsible for any loss of passwords or private information or other damages caused by illegal software.
Make a call
1.In Idle mode, select Keypad and enter an area code and a phone number.
| | | |
2. | Press [ | ] to dial the number. |
3. | To end the call, press [ | ]. |
Answer a call
1. | When a call comes in, press [ | ]. |
2. | To end the call, press [ | ]. | |
Adjust the volume
To adjust the volume of the ringtone
1.In Menu mode, select Settings → Sound profiles.
2.Select the profile you are using.
If you are using the silent profile, you are not allowed to adjust the volume of the ringtone.
3.Select Volume → Call alert.
4.Drag the slider to adjust the volume level and select Save.
To adjust the volume of the touch tone
In Idle mode, press the Volume key to adjust the volume.
To adjust the volume of voice during a call
While a call is in progress, press the Volume key to adjust the volume.
In noisy environments, you may have difficulty hearing the calls while using the speakerphone feature. For better audio performance, use the normal phone mode.
Change your ringtone
1.In Menu mode, select Settings → Sound profiles.
2.Select the profile you are using.
If you are using the silent profile, you are not allowed to change the ringtone.
3.Select Voice call ringtone.
4.Select a memory location (if necessary).
5.Select a ringtone and select Set.
To switch to another profile, select it from the list.
Call a recently dialled number
1. In Idle mode, press [ | ] to display a list of recent |
numbers. | |
2.Select ◄ or ► to a call type.
3.Scroll up or down to a number or name.
4.Select the number or name to view details of the call or
press [ | ] to dial the number. |
Use widgets
Learn to use widgets on the idle screen.
•Some of your widgets connect to web services. Selecting a web-based widget may incur additional charges.
•Available widgets may vary depending on your region or service provider.
To open a widget
1.In Idle mode, scroll left or right to a panel of the idle screen.
2.Select a widget to activate on the idle screen.
To organise your widget
You can organise each panel of the idle screen with your favourite widgets.
1.In Idle mode, select 
at the top left of the screen to open the widget toolbar.
2.Select a widget for each panel.
Enter text
To change the text input mode
•Select Eng to change the input language.
•Select T9 to switch between T9 and ABC modes. The dot turns green in T9 mode.
•Select 123 or sym to switch to Number or Symbol mode.
T9 mode
1.Press appropriate virtual keys to enter an entire word.
2.When the word displays correctly, select 
to insert a space. If the correct word does not display, select 
to select an alternate word.
ABC mode
Press an appropriate virtual key until the character you want appears on the display.
Number mode
Press an appropriate virtual key to enter a number.
Symbol mode
Press an appropriate virtual key to enter a symbol.
To use other features for text input
•To move the cursor, select 
and then the virtual navigation key.
•To delete characters one by one, select 
. To delete words quickly, tap and hold 
.
•To enter punctuation marks, select 1 repeatedly.
•To start a new line, select 
.
•To change case, select 
.
Add a new contact
The memory location to save new contacts may be preset depending on your service provider. To change the memory location, in Menu mode, select Contacts
→More → Settings → Save new contact to → a memory location → Save.
1.In Idle mode, select Keypad and enter a phone number.
2.Select 
→ Create contact → a memory location (if necessary).
3.Select a number type (if necessary).
4.Enter contact information.
5.Select Save to add the contact to memory.
Send and view messages
To send a text or multimedia message
1.In Menu mode, select Messages → Create message.
2.Select the recipient field → Enter manually.
3.Enter a recipient number and select Done.
4.Select the text input field.
5.Enter your message text and select Done. See “Enter text.”
For sending as a text message, skip to step 7. For attaching multimedia, continue with step 6.
6.Select Add media and add an item.
7.Select Send to send the message.
To view text or multimedia messages
1.In Menu mode, select Messages → Inbox.
2.Select a text or multimedia message.
Make fake calls
You can simulate an incoming call when you want to get out of meetings or unwanted conversations.
To activate the fake call feature
In Menu mode, select Settings → Call → Fake call → Fake call hot key.
To make a fake call
Press and hold the Volume key down.
Activate the mobile tracker
When someone inserts a new SIM or USIM card in your phone, the mobile tracker feature will automatically send the contact number to specified recipients to help you locate and recover your phone. To activate the mobile tracker,
1.In Menu mode, select Settings → Security → Mobile tracker → Settings.
2.Enter your password and select OK.
The first time you access Mobile tracker, you will be prompted to create and confirm a password.
3.Select Mobile tracker to turn on the mobile tracker.
4.Select Recipients → More → Contacts.
You can also enter phone numbers including a country code (with +) in the recipient list. Skip to step 6.
5.Select contacts → Add.
6.When you are finished setting the recipients, select Save to save the recipients.
7.Select the sender input field.
8.Enter a sender’s name and select Done.
9.Select Save → Accept.
Activate and send an SOS message
In an emergency, you can send SOS messages to your family or friends for help.
To activate the SOS message
1.In Menu mode, select Messages → Settings → SOS messages → Sending options.
2.Select Sending SOS to activate the SOS message feature.
3.Select Recipients → Add recipients → Contacts. You can also enter phone numbers in the recipient list. Skip to step 6.
4.Select Multiple.
5.Select contacts → Add.
6.When you are finished setting the recipients, select Save to save the recipients.
7.Select Repeat, set the number of times to repeat the SOS message, and select Set.
8.Press the Back key → Yes.
To send an SOS message
1.With the touch screen and the keys locked, press the Volume key four times to send an SOS message to preset numbers.
2. To exit SOS mode, press [ ].
