Front Panel Rear Panel | Nady Systems UB-10 instruction

The AF LEVEL LED DISPLAY (5) on the URR-10 receiver will light up to 5 LEDs for all input signals. Occasional flickering on and off during use of the top red LED indicator in this display is normal, however if the red LED stays on continuously, turn down the instrument volume or the INPUT LEVEL CONTROL (33) on the UB-10 transmitter, or noticeable distortion may result.

(Note: Scratchy noises can sometimes occur when some electric guitars with dirty pots or connections are used with any wireless system. For this reason, the supplied INSTRUMENT CORD (28) has a factory installed capacitor inside the 1/ 4" plug. This capacitor provides first order filtering of the RF signal from the cord into the guitar and eliminates virtually all scratchy noises. Should your equipment still give you scratchy noises, we suggest these steps to eliminate them:

1)Make sure all guitar volume and tone pots are clean and all contacts are solid–this is very important.

2)Provide extra filtering with a 47pf capacitor soldered across the hot to ground terminals of the guitar’s volume and tone pots.)

6.Microphone Use (with either a lavalier or headworn microphone)

Secure the connection from the LAVALIER (30) or HEADWORN MIC CORD (29) by turning the slip ring on the plug into the transmitter clockwise to thread it on to the jack. To unplug, reverse the process. To use the lavalier mic, attach it at chest level. Do not place it too close to the mouth–a distance of about six inches usually works best. To use the headworn mic, place it on the head and adjust the boom so that the mic is about one inch to the side of the front of the mouth. When ready to speak, slide the OFF/STANDBY/ON SWITCH (31) to the ON position. Adjust the volume of the receiver as per the Audio Output Microphone Connection section of the above URR-10 receiver instructions. [Note: Observe care in selecting P.A. volume, transmitter location and speaker placement so that acoustic feedback (howling and screeching) will be avoided. Please also note the pickup pattern characteristics of the microphone selected. Omnidirectional mics pick up sound equally from all directions and are prone to feedback if not used carefully. Unidirectional mics are more resistant to feedback, but pick up sound sources best that are directly in front of the mic. Also, mics that are farther from the sound source, such a lavaliers, require more acoustic gain and thus are also more prone to feedback than close-source mics such as handheld or headworn models that are used close to the mouth].

FRONT PANEL

17	18

REAR PANEL

15	16

1. FRONT PANEL		9. BNC ANTENNA JACKS
2.	SQUELCH CONTROL	10. FUSE
3.	A/B DIVERSITY LED INDICATORS	11.	DC INPUT JACK
4.	RF LEVEL LED INDICATORS	12.	LEVEL LOW/HI SWITCH
5.	AF LEVEL LED INDICATORS	13.	UNBALANCED AUDIO OUT
6. VOLUME CONTROL		14. BALANCED AUDIO OUT
7. POWER ON LED		15.	12-15 VDC ADAPTER
8. POWER SWITCH		16. TELESCOPING ANTENNAS
		17. STANDARD RACK EARS
		18.	FR-2 FRONT-ANTENNA RACK KIT (optional)


10		7

UB-10 specifications

Nady Systems UB-10 is a versatile and compact wireless microphone system designed for a range of applications, making it an ideal choice for musicians, public speakers, and audio professionals. With a focus on delivering high-quality audio transmission, the UB-10 highlights advanced technologies and user-friendly features that enhance performance and reliability.

One of the standout features of the UB-10 is its UHF frequency range. This allows for a more stable signal transmission compared to VHF systems, significantly reducing the risk of interference from other wireless devices. The UB-10 operates in the UHF bands, providing users with a selection of frequencies to choose from, ensuring clear audio quality even in crowded environments.

A key characteristic of the UB-10 is its lightweight and portable design. The system's bodypack transmitter is designed for ease of use and can be comfortably worn during performances or presentations. The durable construction ensures it can withstand the rigors of frequent use, making it a reliable option for traveling performers or mobile presenters.

The UB-10 also features a built-in rechargeable battery that offers extended use time. This sustainability aspect minimizes the need for disposable batteries and encourages environmentally friendly practices. The transmitter and receiver provide visual indicators for battery status, allowing users to monitor battery life easily.

Another important technology in the UB-10 is its automatic frequency scanning capability. This feature detects and selects the cleanest frequency available, simplifying setup and operation. Users no longer have to spend excessive time tuning their systems manually, allowing them to focus on their performance or presentation.

Additionally, the UB-10 includes a variety of output options, enabling easy connectivity with different audio systems, including mixers and amplifiers. The receiver provides both XLR and 1/4” outputs, making it versatile enough for studio and live sound applications.

In conclusion, the Nady Systems UB-10 wireless microphone system stands out for its robust performance, user-friendly features, and technological advancements. With its UHF frequency reliability, portable design, rechargeable batteries, automatic scanning, and versatile output options, it serves as an excellent choice for anyone in need of a dependable wireless audio solution. Whether for live music, theater, or public speaking events, UB-10 fulfills the demands of modern audio professionals with ease.