Selecting Energy Saving Mode
ENGLISH
If your wish to save energy when using the control panel of your air conditioner, select the Energy Saving mode with the Energy Saving button.
1 If necessary, press the 
(On/Off) button.
Result: ◆ The power indicator on the control panel comes on.
◆The indoor unit beeps.
◆The air conditioner starts up in the Cool mode.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Switched on
◆Stopped
lt will start up normally after three minutes.
2 Press the 
button on the control panel.
Result: ◆ The indoor unit beeps.
◆The air conditioner runs in the Energy Saving mode.
◆The outer air flow blade moves up and down.
3 To adjust the temperature, press the 
buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive.
Note ◆ You can adjust the temperature only when the air conditioner runs in the Cool mode.
4 To select the fan speed, press the 
button one or more times until the required setting is displayed.
5To control the direction of the air flow, refer to page 16.