Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
◆You purchase the air conditioner
◆ The remote control does not work correctly
Note ◆ Use two AAA, LR03 1.5V batteries.
◆ Do not use old batteries or different kinds of batteries together.
◆Batteries may be completely discharged after 12 months,
even if they have not actually been used.
1Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it.
2 Insert the two batteries, taking care to respect the polarities : ◆ + on the battery with + on the remote control.
◆ - on the battery with - on the remote control.
3 Close the cover by sliding it back until it clicks into place.
Operating Preparation
ON |
Look around the indoor and outdoor unit. Confirm if any obstacles that may prevent the air flow are present near the air conditioner.
1Turn the power switch on.
IMPORTANT To operate the unit, the power switch is fitted to the wall
must be set to ON.
Using the Control Panel on the Indoor Unit
You can operate with the indoor unit when you do not wish to or cannot operate the air conditioner with the remote control.
You can : Adapt the On/Off, Temperature, Fan Speed, Energy Saving,
Air Swing settings to your specific requirements.
For example : Remote control is broken or lost.
Using the Remote Control
All air conditioner features except Lock function and Energy Saving mode can be controlled from your seat by using the remote control.
You can : Adapt the Auto mode, Cool mode, Turbo mode and
Fan Speed/Timer settings to your specific requirements.
Note You must operate the Turbo, Long and Off Timer function with the remote control.