CONTROL PANEL
For more details, see control panel of your washing machine.
POWER BUTTON
Press this button once to operate.
Press once again to turn the power off.
START/HOLD BUTTON
Use to pause and restart the operation.
To change the washing procedure during operation, press this button to stop, and once again to restart after changing the procedure.
DELAY START BUTTON | DELAY |
START | |
Press this button when delay start washing is needed. |
|
COURSE SELECT BUTTON | COURSE |
With every press of this button, the washing course changes; |
|
FUZZY(DIGITAL) BLANKETSPEEDY WOOL ECO+ FUZZY(DIGITAL)
FUNCTION SELECT BUTTON
FUNCTION
With every press of this button, the function changes;
SOAK,WASH,RINSE,SPIN WASH&RINSE&SPIN&AIR TURBO WASH RINSE
SPIN SPIN&AIR TURBO WASH&RINSE RINSE&SPIN RINSE&SPIN&AIR TURBO WASH&RINSE&SPIN
WATER LEVEL SELECT BUTTON | WATER |
According to the washload,select the water level ; | LEVEL |
MEDIUM HIGH EXTRA LOW LOW MEDIUM |
|
WATER SUPPLY SELECT BUTTON
As you press this button, the type of water is selected as follows.
COLD COLD + HOT HOT COLD
It is available for all courses other than for the WOOL.
WATER SUPPLY
REMAINING TIME INDICATOR LIGHT
The indicator light shows the remaining time (in minutes) of each wash cycle. At the end of the cycle,the power automatically switches off.
WASHING PROCEDURE
Before starting washing, check the following; Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose. (In case no drain pump)
Put the laundry into the washer and add detergent, too. Be careful not to overload. Use right detergent
for the fabrics you are washing.
FUZZY(DIGITAL) COURSE
Selects the best washing course | POWER | START/ | |
HOLD | |||
| |||
automatically. |
|
|
1.Press the POWER Button to"ON".
2.Press the START/HOLD button.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
3. Close the lid.
BLANKET COURSE |
| START/ | |
POWER | COURSE | ||
HOLD | |||
1. Press the power button to |
| ||
|
| ||
"ON". |
|
|
2.Press the course select button once.
3.Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
4