Samsung VCU2911S3R/XFA Assembling Parts, Assembled Vacuum Cleaner Parts, Attaching the Handle

Page 3

Assembling Parts

Assembled Vacuum Cleaner Parts

1-1

 

Front

Back

The assembled cleaner will look like the illustration to the left.

1.Handle 2.Power switch

3.Quick release cord hook 4.Post-Motor Filter 5.Crevice tool

6.Handle release 7.Carrying handle 8.Hose 9.Extension wand 10.Combination tool 11.Cyclone-Lever 12.Dirt Cup 13.Filter Cup 14.Upper Tank 15.Louvers 16.Hose Wand Base 17.Height Adjustment Dial 18.Hose Clip

WARNING!

OPERATE THE VACUUM CLEANER ONLY AT THE VOLTAGE SPECIFIED ON THE NAMEPLATE.

Step 1. Attaching the Handle

1-2

Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body.

1-3

Insert the screw provided into the existing hole. Tighten the screw securely with a screwdriver.

Before securing the handle, please check that the handle is fitted to the vacuum body and make sure there’s no gap.

Step 1. Attaching the Handle

1-4

1-5

Slide the end of the hose wand with tabs into the Hose Wand Base.

Slide the extension wand and the crevice tool together into the storage clip.

2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Vacuum Cleaner Important Safety Instructions Front Back Assembled Vacuum Cleaner PartsAssembling Parts Attaching the HandleCarrying handle ON-OFF Switch Handle positionsCleaning Tool attachments C. Extension Wand OperationWhen to empty the Dirt Cup MaintenanceCleaning the Pre/Post-motor Filter How to cleanDisconnect cleaner from electrical outlet When to replaceHow to replace When to replace the agitator brush rollI n t e n a n c e Tro u b l e s h o o t i n gClearing Blockages 0860 7267864 Samsung 0870 242
Top Page Image Contents