Installing Your Microwave oven |
| Setting the Time |
EN | This microwave oven can be placed almost anywhere (kitchen work |
surface or shelf, movable trolley, table). |
•Properly earthed
•Plugged into a standard 220 Volt, 50Hz/60 Hz, AC earthed socket.
Your microwave oven has an inbuilt clock. The time can be displayed in either the
• When you first install your microwave oven | |
• After a power failure | |
Do not forget to reset the clock when you switch to and from | |
20 cm | 10 cm |
above | behind |
| 10 cm of |
| the side |
1.Install the oven on a flat, level, stable surface. Make sure there is adequate ventilation for your oven with at least 10cm(four inches) of space behind, and on the sides of the oven and 20cm(eight inches) of above and that the oven is at least 85cm(thirty three inches) off the floor.
2.Remove all packing materials inside the oven. Install the roller ring and turntable. Check that the turntable rotates freely.
summer and winter time. |
1.To display the time in the... Then press the Clock button...
Once | |
Twice |
2.Set the hour with the h/10min button and the minutes with
the min/1min button.
Never block the air vents as the oven may overheat and automatically switch itself off. It will remain inoperable until it has cooled sufficiently.
Plug the cable into a
DO NOT install the microwave oven in hot or damp surroundings.
•Example: Next to a traditional oven or radiator.
•The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven.
•Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.
This microwave oven has to be connected to the plug endurable to proper power consumption. This microwave oven has to be positioned so that the plug is accessible.
3.When the right time is displayed, press the Clock button again to start the clock.
Result : The time is displayed whenever you are not using the microwave oven
6