Setting the Clock Listening to a Compact Disc

MM-L7-NO RDS(GB) 2001.12.21 16:17 Page 10

Setting the Clock		Listening to a Compact Disc

Your system is equipped with a clock which allows you to turn GB your system on and off automatically. You should set the clock:

When you purchase the Micro component system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1Switch the system on by pressing On/Standby.

2Press Timer/Clock twice.

Result: CLOCK is displayed.

3Press Program/Set.

Result: The hour flashes.

4To...Press...

Increase the hours	š
Decrease the hours	›

5When the correct hour is displayed, press Program/Set.

Result: The minutes flash.

6To...Press...

Increase the minutes	š
Decrease the minutes	›

7When the correct time is displayed, press Program/Set.

Result: The clock starts and is displayed, even when the system is in standby mode.

You can display the time, even when you are using another function, by pressing Timer/Clock once.

On/Standby

		Sleep	Mute
1
Power	Preset	Timer	Timer/
Sound	EQ	on/off	Clock
			2
Mono/ST.	Tape	Repeat	Program/
Mono/ST.	Mode	Repeat	Set
			3 5 7
	CD/TAPE/MP3
Band		Function
	VOL.
	Tuning
4 6	Mode		4 6
4 6			4 6

VOL.

You can play 12 cm or 8 cm compact discs without an adapter.

This unit has been designed to playback the CDs: Audio CD, CD Text, CD-R and CD-RW.

Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.

1Select the CD function by pressing FUNC. button.

2Press the Open/Close (ž) button on the front panel.

Result: The compartment opens.

3Place your disc in the compartment, with the label on the disc facing upwards.

4Close the compartment by pressing the Open/Close (ž) button again.

Result: The display indicates the number of tracks on the disc.

5Press the PLAY/PAUSE (ÃÈ) button.

Result: The first track on the disc plays and the track number is displayed.

6To stop playback temporarily, press the PLAY/PAUSE (ÃÈ) button.

Press PLAY/PAUSE (ÃÈ) again to continue playing the disc.

7Press the STOP (■) button when you have finished.

	2 4
	CD Door Open/Close
1	FUNC.

Volume

R 5 6

CD/TAPE/TUNING

Tuning Mode

CD Repeat

Repeat A B

7	Preset EQ	+10 (CD)
Band	Preset EQ	+10 (CD)
		Record
PROG./Set	CD Synchro	Start/Stop

	CD/TAPE/MP3
7	5 6
Band	Function

When playing a CD-R or CD-RW

User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played back only if they are already “finalized”.

◆You can play back your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played back depending on their characteristics or recording conditions.)

◆Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

◆CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.)