Samsung MML7FH/UMG Inserting Remote Control Batteries, Connecting Your System to the Power Supply

Page 7

MM-L7-NO RDS(GB) 2001.12.21 16:16 Page 7

Where to Install Your Micro-Component System

To take full advantage of your new MICRO component system, follow these installation instructions before connecting the unit.

Install the system on a flat, stable surface.

Never place this unit on carpeting.

Never locate this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc compartment easily.

Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed at an equal distance above the floor.

Inserting Remote Control Batteries

Insert or replace remote control batteries when you:

 

Purchase the Micro component system

GB

Find that the remote control is no longer operating

correctly

When replacing the batteries, use a new set of batteries and never mix alkaline and manganese batteries.

1Place your thumb on the position marked on the battery compartment cover (rear of the remote control) and push the cover in the direction of the arrow.

2Insert two AAA, LR03 or equivalent batteries, taking care to respect the polarities:

+ on the battery against + on the remote control

– on the battery against – on the remote control

3Replace the cover by sliding it back until it clicks into position.

R

Connecting Your System to the Power Supply

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the voltage.

1

Check the position of the voltage selector at the bottom of the system

2

(OPTIONAL).

Plug the main lead (marked AC Cord on the rear of the system) into

3

an appropriate socket.

Press the On/Standby button to switch your mini-compact system on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VOLTAGE

SELETOR

7

Image 7
Contents Micro Component System Class 1 Laser Product Safety WarningsContents SymbolsFront Panel View On/Standby Remote ControlRear Panel View Direct the loudspeakers towards the listening area Inserting Remote Control BatteriesConnecting Your System to the Power Supply Where to Install Your Micro-Component SystemConnect Connecting the LoudspeakersConnecting to an External Source To other sources Example Television Video disc playerAM aerial for long and medium waves can be Connecting the FM AerialConnecting the SW Aerial option How to connect a Coaxial Type aerialResult The hour flashes Setting the Clock Listening to a Compact DiscAfter a power failure After unplugging the unit Press Program/SetYou can decide for yourself Selecting a Track CD Repeat FunctionProgramming the Order of Playback Searching for a Specific Music Passage on a CDYou can store up to Searching for and Storing the Radio StationsMedium Wave To listen to Press Selecting a Stored StationImproving Radio Reception You can listen to a stored radio station as followsMaintaining the Sound Quality Listening to a CassetteYou can record a compact disc on a cassette Recording a CD with the CD Synchro FeatureRepeat A↔B Function Recommendations for RecordingCancelling the Timer Timer Function5 6 Are listening Setting the System to Switch Off AutomaticallyEqualizer Mute FunctionSound Power Sound functionConnecting Headphones Microphone Function optionBefore Contacting the After-Sales Service Safety PrecautionsUsable sensitivity 60 dB Technical SpecificationsElectronics
Related manuals
Manual 21 pages 63.1 Kb