Samsung MML7FH/UMG manual Connecting the Loudspeakers, Connecting to an External Source

Page 8

MM-L7-NO RDS(GB) 2001.12.21 16:16 Page 8

Connecting to an External Source

 

Connecting the Loudspeakers

 

 

 

The auxiliary input can be used to take advantage of the sound GB quality of your MICRO component compact system when listening

to other sources.

Example:

A television

 

A video disc player

 

A Hi-Fi stereo video cassette recorder

To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable.

1Set the system to standby mode and disconnect it and the external source from the main.

2Connect the audio cable to the rear of the micro component compact system.

Connect the...

To the connector marked...

Red jack R (right)

White jack L (left)

For optimum sound quality, do not invert the right and left channels.

3Plug the system back into the main socket and press On/Standby to switch it on.

4Select the AUX function by pressing FUNC. button. Result: AUX is displayed.

5Switch the external source on.

6Adjust the volume and balance as required:

Volume

Equalizer

The loudspeaker connector terminals are located on the rear of the system.

There are four terminals on the system:

Two for the left speaker (marked L)

Two for the right speaker (marked R)

To achieve the correct sound quality, connect the:

Red wire to the + terminals

Black wire to the – terminals

1To connect a wire to a terminal, push the tab as far as it will go:

To the right on the system

2Insert the wire, up to the plastic sheathing, in the hole.

3Push the tab back:

To the left on the system, until it clicks into place

To the top on the loudspeaker

Result: The wire is pinched and held firmly in place.

4Repeat the operation for each wire.

(Right Speaker)

(Left Speaker)

Directions in Installing Speaker

Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.

Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.

Do not take the speaker apart from TV or computer monitor. The speaker near the TV or computer monitor may influence the quality of the screen display.

8

Image 8
Contents Micro Component System Safety Warnings Class 1 Laser ProductSymbols ContentsFront Panel View Remote Control On/StandbyRear Panel View Inserting Remote Control Batteries Connecting Your System to the Power SupplyWhere to Install Your Micro-Component System Direct the loudspeakers towards the listening areaConnecting the Loudspeakers Connecting to an External SourceTo other sources Example Television Video disc player ConnectConnecting the FM Aerial Connecting the SW Aerial optionHow to connect a Coaxial Type aerial AM aerial for long and medium waves can beSetting the Clock Listening to a Compact Disc After a power failure After unplugging the unitPress Program/Set Result The hour flashesSelecting a Track CD Repeat Function Programming the Order of PlaybackSearching for a Specific Music Passage on a CD You can decide for yourselfMedium Wave Searching for and Storing the Radio StationsYou can store up to Selecting a Stored Station Improving Radio ReceptionYou can listen to a stored radio station as follows To listen to PressListening to a Cassette Maintaining the Sound QualityRecording a CD with the CD Synchro Feature Repeat A↔B FunctionRecommendations for Recording You can record a compact disc on a cassette5 6 Timer FunctionCancelling the Timer Setting the System to Switch Off Automatically EqualizerMute Function Are listeningPower Sound function Connecting HeadphonesMicrophone Function option SoundSafety Precautions Before Contacting the After-Sales ServiceTechnical Specifications Usable sensitivity 60 dBElectronics
Related manuals
Manual 21 pages 63.1 Kb