instructions
LOG-IN
1.Turn on the power of all the components of the system.
2. When the power is applied by connecting the power adapter at the | Login |
|
back of system keyboard, the following indication is displayed on the |
| |
|
| |
LCD screen. | Operator No. | Password |
Clear
Enter
3.Using the keypad of the touch screen or the number key of the keyboard, enter the registered Operator number (1~32) and press <Enter>.
The default Operator No. is 1.
Refer to “MENU setup”, “REGISTER NEW OPERATOR” for the registration of the operator number. (see page 24)
M If an unregistered operator number is entered, a message of “Invalid Operator!” will appear on the screen and the
4.Using the number keys, enter the registered Password
M The default Password is 4321. Refer to “MENU setup”, “REGISTER NEW OPERATOR” for the registration of the password. (see page 24)
M If an unregistered password is entered, a message of “Invalid Password!” will appear on the screen and the
5.When you have logged in successfully, the System Keyboard will enter the following camera control mode and display “Normal Mode” or “Video Mode” as in the right figure.
To change the display mode, see “Display Mode” in “System Information & Setup”. (see page 27)
Login
Error
No.
Invalid Operator!
Clear
Enter
Login
Error
No.
Invalid Password!
Clear
Enter
CAM
002
MON
002002
M Simply tap the screen if you want to switch from the current mode to other mode.
M If the key board is not operated for three minutes, the graphic panel is changed to the sleep mode and the screen is not displayed. (Samsung Logo display)
Press the touch panel/key or move the joystick/jog shuttle, and then the screen before the sleep mode is displayed again.
6.If you want to log out, press and hold both [PRESET] and [ALARM RESET] buttons simultaneously for more than 2 seconds to display the
CAM
002
MON
002002
Login dialog.
14_ instructions