Samsung SSC-5000N manual Menu setup, Main Menu, Keyboard Setup, RS-485 Communication Setup

MENU setup

MAIN MENU

1.Press the [MENU] button of the keyboard and a log-in window will appear as follows.

2.Using the number keys, enter the correct Operator No. and Password.

3.MAIN MENU will be displayed on the screen when you complete the log-in process.

4.Press the item you want to control on the main menu.

Press the <EXIT> icon in the main menu to return to the camera control mode.

M If the CHECK PASSWORD item is set “Off” in the keyboard setup, press the [MENU] button. MAIN MENU screen will directly appear without the log-in process.

M If you press the [MEMU] button while the OPERATOR’s LEVEL is the MANAGER’s or OPERATOR’s level, you cannot go into the menu.

Login
	Operator No.	Password
		Clear
		Enter
MENU	Keyboard Setup
MAIN	Camera	000 Setup
	DVR 001 Setup

KEYBOARD SETUP

On MAIN MENU, press <Keyboard Setup> to call the Keyboard Setup screen.

The KEYBOARD SETUP menu are constituted by 7 main items as follows.

Keyboard	RS-485 Communication Setup
	Change Password
Setup
	Check Password	On
	Register New Operation
	Camera Data Download
	Camera Data Upload
	System Information and Setup

RS-485 COMMUNICATION SETUP

On the Keyboard Setup menu, press <RS-485 Communication Setup>

and the RS-485 Communication Setup menu will appear on the screen.

M The default address of the keyboard is 0.

M The default Baud Rate of the keyboard is 9600BPS.

M The factory default setting of Duplex of keyboard is Half Duplex.

Keyboard	RS-485 Communication Setup
	¨ Address Set	0
Setup	¨ Protocol (Port 1)	SAMSUNG
	¨ Protocol (Port 2)	SAMSUNG
	¨ Baud Rate	9600
	¨ Duplex	Half Duplex

ADDRESS SET

The address of the system keyboard can be set.

1.Press <Address Set> and the keyboard address input window will appear as shown in the right figure.

2.Enter the address by using the number keys and press the [ENTER] button.

Press the <EXIT> icon on lower left if you want to clear the window without entering the address.

Input Keyboard Address (0~32)
Keyboard
Setup
Clear	Enter

M ADDRESS "0": For only one unit

ADDRESS "1~32": For multiple units connected together

M When using multiple units that are connected together, you must select a number between 1 and 32 before use. If the value is set to "0", this may cause communication to fail and malfunction.

M When using multiple units connected together and operating two separate keyboards at the same time, the first keyboard to start communication takes precedence.

22_ MENU setup