19
GeTTInG sTaRTeD
a) Router status l ight
Your Router’s status is shown by the light on the front.
Off: The Router is not plugged into a power source.
blinking Green: The Router is starting up.
solid Green: The Router is connected to the Internet.
blinking amber: Either the A DSL (RJ 11) cable
is not plugged in, or there is no signal.
b) Wi-fi Protected setup (WPs) light and button
The WPS button on the front of your Router can be use d to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers. To use
the WPS feature on your Router, see “Getting Started > Adding
Computers to Your Net work > Using the W PS Button”.
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection.
Off: Idle
blinking Green: The Ro uter i s lis tening for a
WPS-enabled computer or other device.
solid Green: The Rou ter ha s made a sec ure
connection with the computer or other device.
amber: A connection was not created.
front Panel(a)
(b)