DEMO
Function / DIMMER Function / 
ECO Function
DEMO Function
You can view the various functions available on your system.
Press DEMO/DIMMER button.
•The various functions available are listed in turn on the display.
•All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate sections.
DIMMER Function
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
Press DEMO/DIMMER button.
• Each time the button is press, the brightness changes as follows: DEMO ON DIMMER ON(Dim) DIMMER OFF(Bright).
Note
Press any buttons to cancel DEMO function.
Connecting Headphones/Microphone ENG
You can connect a set of headphones to your mini component system so that you can listen to music or radio programmers without disturbing other people in the room. The headphones must have a 3.5ø jack or an appropriate adapter.
You can also insert microphone to sing along with your favorite Cds.
When you turn off the main unit, DEMO function will be auto start after 10 senconds. if you want to cancel this DEMO function, press DEMO/DIMMER button again.
ECO Function
You can save the power consumption while the unit is turned off (on standby)
In Standby mode, press and hold the POWER button for
Connect the headphones to the PHONES jack on the front panel.
•The loudspeakers are no longer used to output the sound.
Note
Plug a microphone with a 6.3ø MIC jack into the Mic terminal.
•Connect one Microphone.
•Turn the MIC VOL knob to adjust the MIC Volume.
longer than 3 seconds.
•Result: ECO displays and the main set automatically switches itself into the power saving mode.
53
•Prolonged use of headphones at a high volume may damage your hearing.
MISCELLANEOUS 54