Setting the Clock, Disc Playback | Samsung MAX-DG54T/XFA guide

Setting the Clock

For each step, you have a few seconds to set the required options.

If you exceed this time, you must start again.

Switch the system on		Press TIMER/CLOCK		Press ENTER.
by pressing POWER
		twice.
1button.	2		3 The hour flashes.

	• "CLOCK" is displayed.		• Increase the hours :
			• Decrease the hours :

Disc Playback

ENG

Selecting a CD in the Disc changer

To select a specific disc, press the DISC CHANGE button on the front panel or DISC SKIP on the remote control, until the required disc indicator flashes.

Result: All the discs will be played in turn, starting with the one selected.

• If the disc selected is not loaded, the next disc is played automatically.

When the correct

4 hour is displayed, press ENTER. The minutes flash.

•Increase the minutes :

•Decrease the minutes :

5		When the correct
		time is displayed,
		press ENTER.

•"TIMER" appears in the display.

•The current time is now set.

Note

•You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.

	•	For mixed discs, the play order is as below:MP3/WMA DIVX JPEG.	OPERATION
Note
	•	Depending on the content of the disc, the initial screen may appear different.


	• Depending on the recording mode, some MP3-CDs cannot be played.
		For CD discs, you can press the numeric buttons to select the track, when you
	• press the numeric buttons after 3 seconds, the playback starts automatically.

• Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.

• DTS Audio is not supported.

•DVD Audio Disc is not supported.

Note •You can also use on the panel front instead of buttons in step 3,4.

Checking the Remaining Time Press the REMAIN button.

•For checking the remaining time of a title or chapter being played.

Each time the REMAIN button is pressed , the time is displayed as below:

DVD	TITLE REMAIN TIME

CHAPTER REMAIN TIME

ELAPSED TIME

CD MP3

Press the REMAIN button.

If you press the REMAIN button, the remaining time is displayed.

To cancel this function, press the REMAIN button again.

To stop playback, press STOP button during playback.

• If pressed once, the stop position will be stored in memory. If PLAY ( ) button is pressed, playback resumes from the stop position. (This function works only with DVDs.)

• If pressed twice, “STOP” is displayed, and if PLAY ( ) button is pressed, playback starts from the beginning.

To temporarily pause playback, press PAUSE button during playback.

•To resume playback, press PLAY( ) button again.