CD
RIPPING Function
You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track of your choice.
Timer Function | ENG |
• The timer enables you to switch the system on or off at specific times. |
|
• If you no longer want the system to be switched on or off automatically, you must cancel the timer. |
|
• Before setting the timer, check that the current time is correct. |
|
For each step, you have a few seconds to set the required options. |
|
• If you exceed this time, you must start again. |
|
1 Switch the system
Connect the |
Load a compact |
Example: You wish to wake up to music every morning.
on by pressing
POWER.
Press CD
4 RIPPING button on remote control to starting ripping.
¡If the system is playing state, turn the CD |
RIPPING dial down or press CD RIPPING button |
2 USB. |
To stop ripping, press
5 STOP(
)button.and then automatically create and save as the MP3 file.
3 |
| disc(Digital |
| Audio). |
Press the OPEN/CLOSE button to open the CD door.
Insert a CD and press the OPEN/CLOSE button to close the CD door.
Use the CD selection ( 
) buttons to select the desired song.
Switch the system |
| 2 | Press TIMER/ |
| CLOCK until | ||
on by pressing |
| TIMER is | |
1 POWER. |
| displayed. | |
|
|
|
|
3 Press the ENTER button.
•ON TIME is displayed for a few seconds, followed by any switch- on time already set; you can set the timer
on the remote control to start the ripping for the |
current track. |
¡Turn CD RIPPING dial up or press and hold CD |
RIPPING button on the remote control to start |
ripping the all tracks of Disc. |
¡Press this button, “TRACK RIPPING” is |
displayed and CD RIPPING starts. |
¡Press and hold this button, “FULL CD RIPPING” |
is displayed and CD RIPPING starts. |
¡During CD ripping, do not disconnect USB |
device. |
After
4 Set the timer
a. Set the hour by pressing 
or 
button.
b. Press ENTER .
5 Set the timer switch-off time.
a. Set the hour by pressing
or 
button.
b. Press ENTER.
Press 
or 
button
6 to adjust the volume level and press
ENTER.
•The source to be selected is displayed.
Note
◆Don’t disconnected USB and AC Cord during |
the file damage.If you want to stop |
press stop Key first and after the CD Stopped,then you can remove the USB |
device. |
◆If you disconnected USB device when CD Ripping, the main unit will be |
power off and you may not delete the ripped file, In this case, please connect |
the USB on the PC and backup the USB data on the PC first and then |
formate the USB device . |
When the USB memory is not enough, it will be displayed “RIPPING |
•The minutes flash.
c.Set the minutes by pressing 
or 
button.
d.Press ENTER.
•OFF TIME is displayed for a few seconds, followed by any switch- off time already set; you can now set the timer
•The minutes flash.
c.Set the minutes by pressing 
or 
button.
d.Press ENTER.
•VOL 10 is displayed, where 10 corresponds to the volume already set.
◆ |
ERROR”. |
◆With external HDD,FAT format the USB can be CD Ripping,but not NTFS. |
The CD Ripping function of this product does not support all USB devices. |
◆When you use CD high speed search function or in the Pause or Stop mode, |
the CD Ripping can’t work. |
◆During CD Ripping, do not deal impact.If is shocked while CD Ripping, CD |
Ripping maybe disengage. |
◆Sometimes, some of USB devices, CD Ripping time is long. |
◆In program mode, you can't use CD RIPPING function. |
◆When CD Ripping completes or Stops, the CD will reload. |
Press or button | 8 | Press ENTER to | |
to select the source to | |||
confirm the timer. | |||
be played when the | |||
| |||
7 system switches on. |
|
• TUNER (radio) : a Press ENTER.
b Select a preset station by pressing or .
• DVD/CD (compact disc) : Load on or more compact disc.
• USB :Insert a USB.
• TAPE (cassette) : Insert a cassettetape.
Press POWER to
9 set the system to standby mode.
•
is displayed to the top right of the time, indicating that the timer has been set.
•The system will switch on and off automatically at the required times.
TAPE DECK
| • If the timer switch on and off times are identical, the word ERROR is displayed. | |
Note | ||
| • | If there is no disc or usb, when you select the “DVD/CD, TAPE, USB, it will automatically change to |
| ||
| “TUNER”. | |
47 | 48 |