Disc Playback
Selecting a CD in the Disc changer
The CD function is automatically selected when Disc Skip is pushed.
To select a specific disc, press the corresponding DISC (1, 2, 3) button on the front panel or
DISC SKIP on the remote control, until the required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
• If you use the DISC (1, 2, 3) function when listening to the radio or to a tape, the system switches automatically to the CD mode.
• If the disc selected is not loaded, the next disc is played automatically.
DVD VCD CD
• Playback starts automatically.
MP3 JPEG DivX
• Playback starts automatically.
• If the TV is on, a list of MP3s on the CD will appear on the TV screen.
Note | • | Depending on the content of the disc, the initial screen may appear different. | |
• | Depending on the recording mode, some | ||
| |||
| • | Table of contents of a | |
|
| on the disc. |
Disc terminology
Titles and chapters (DVD-VIDEO)
•
These numbers are called "title numbers" and "chapter numbers".
Tracks (Video and music CDs)
•Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called "track numbers".
Note | • In this manual, the instructions marked with "DVD ( | DVD )" are applicable to |
|
| |
| Where a particular DVD type is mentioned, it is indicated separately. |
•Depending on the content of the disc, the initial screen may appear different.
OPERATION
To temporarily pause playback, press PLAY/PAUSE during playback.
•To resume playback, press PLAY/PAUSE button again.
To stop playback,
press STOP during playback.
•If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory. If PLAY/PAUSE
( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
•If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.
17 | 18 |