Connecting
External Components
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
(not supplied)
Audio Cable
If the external analog component has only one Audio Out, connect either left 
or right.
1 Connect AUX IN on the player to Audio Out on the external analog component.
•Be sure to match connector colors.
2 Press AUX to select AUX.
• ‘AUX’ appears in the display.
Connecting the FM Antennas
FM Antenna (supplied)
iPod
1 Connect the FM antenna supplied to the FM COAXIAL Jack.
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
Note • This unit does not receive AM broadcasts.
Cooling Fan | The cooling fan supplies cool air to the unit to prevent overheating. |
|
|
Please observe the following cautions for your safety.
• Make sure the unit is
•Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
ENG
CONNECTIONS
19 | 20 |