Listening to Radio, Presetting Stations

• Each time the button is pressed, the sound switches between "STEREO" and "MONO".

• In a poor reception area, select MONO for a clear, interference-free broadcast.

station.

Automatic Tuning 2 Press the STOP ( ) button to

select "AUTO" and then press button to automatically search the band.

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

pressto tune into a lower or higher frequency.

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

Listening to Radio

You can listen to the chosen band (FM broadcast stations) by using either the automatic or manual tuning operation.

Presetting Stations

You can store up to:

15 FM stations

ENG

Remote Control Unit

Example: Presetting FM 89.1 in the memory

1 Press TUNER button.

2	Tune into the
	desired station.

	Preset Tuning 1	Press the STOP ( ) button
	Preset Tuning 1	to select PRESET and then
		to select PRESET and then

press TUNING , button to select the preset station.

Automatic Tuning 2 Press the STOP ( ) button to

select "AUTO" and then press

TUNING , button to automatically search

1 Press the TUNER button and select the FM band.

	Press TUNING		,	Press the TUNER
		to select
2				3 MEMORY button.
	"89.10".

•Refer to Step 2 on page 49 to automatically or manually tune in to a station.

kHz

Main Unit

kHz

Press the FUNC.

1 button to select the FM band.

the band.

Manual Tuning Press STOP ( ) to select MANUAL and then briefly press

TUNING , to tune into a lower or higher frequency.

2 Select a broadcast station.

	Press the STOP (		) button
Preset Tuning 1

	to select PRESET and then
	to select PRESET and then
press		button to select the preset

4 Press TUNING

, to select preset number.

• You can select between 1 and 15.

kHz

5	Press the TUNER	6	To preset another
			station, repeat
	MEMORY button.
			steps 2 to 5.

•If you can’t press “TUNER MEMORY” in 5 seconds, the preset disappears and “FM” displays.

kHz

RADIO OPERATION

49	50