Setting the Clock

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

Switch the system on		Press TIMER/CLOCK
by pressing POWER
		twice.
1button.	2

• "CLOCK" is displayed.

3 Press ENTER. The hour flashes.

•Increase the hours :

•Decrease the hours :

Disc Playback

ENG

1 Press OPEN/CLOSE button to open the disc tray.

2	Load a disc.
	• Place a disc gently into the tray with the disc’s label facing up.

When the correct

4 hour is displayed, press ENTER. The minutes flash.

•Increase the minutes :

•Decrease the minutes :

5		When the correct
		time is displayed,
		press ENTER.

•"TIMER" appears in the display.

•The current time is now set.

	3	Press OPEN/CLOSE button to close the disc	OPERATION
		tray.

		• For mixed discs, the play order is as below:MP3/WMA DIVX JPEG.

Note
		• Depending on the content of the disc, the initial screen may appear different.

Note • You can display the time, even when you are using another function, by pressing

TIMER/CLOCK once.

• You can also use on the main set instead of buttons in step 3,4.

•Depending on the recording mode, some MP3-CDs cannot be played.

•For CD discs, you can press the numeric buttons to select the track, when you press the numeric buttons after 3 seconds, the playback starts automatically.

•Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.

•DTS Audio disc is not supported.

•DVD Audio disc is not supported.

Checking the Remaining Time Press the REMAIN button.

•For checking the remaining time of a title or chapter being played.

Each time the REMAIN button is pressed , the time is displayed as below:

DVD	TITLE REMAIN TIME

CHAPTER REMAIN TIME

ELAPSED TIME

CD MP3

Press the REMAIN button.

If you press the REMAIN button, the remaining time is displayed.

To cancel this function, press the REMAIN button again.

To stop playback, press STOP button during playback.

• If pressed once, the stop position will be stored in memory. If PLAY ( ) button is pressed, playback resumes from the stop position. (This function works only with DVDs.)

• If pressed twice, “STOP” is displayed, and if PLAY ( ) button is pressed, playback starts from the beginning.

To temporarily pause playback, press PAUSE button during playback.

• To resume playback, press PLAY( ) button again.