Sound Mode
EQ
Your
Press EQ on the remote control. Each | EQ |
time you press EQ,the EQ model will |
|
switch in the following order: |
|
OFF; FLAT ;RANCHA ; SAMBA ; CUMBIA ; HABANA ; BOOMBA;REGGAE ; PARTY ; POP ; HIPHOP; ROCK;JAZZ ; CLASS ; STA+EQ; DYN+S;MP3+ ; VIR+S .
✎✎NOTE
`` When CD Recording, the EQ function can't work and the EQ automatically covery to "OFF" mode.
`` This function is not available during playback of an DVD disc.
P BASS
Your
1.Press the SOUND button on the remote
control.SOUND
Result: “P BASS” is displayed.
2. To cancel this function, press this button again, “P OFF” is displayed for a few seconds.
✎✎NOTE
`` When CD Recording, the Power Bass function can't work and the Power Bass automatically covery to "OFF" mode.
Setting the Clock
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1.Switch the system on by pressing the POWER button.
2.Press TIMER/CLOCK button and then press the ENTER button,
Result: "CLOCK" is displayed. | TIMER | |
3. Press ENTER, the hour flashes. | CLOCK | |
`` | Decrease the hours: _ |
|
`` | Increase the hours: + |
|
4.When the correct hour is displayed, press
ENTER.
Result: the minutes flashes.
`` Decrease the minutes: _
`` Increase the minutes: +
5.When the correct minute is displayed, press
ENTER.
Result: | "TIME" appears in the display. |
`` The current time is now set.
✎✎NOTE
`` You can display the time, even when you are using another
function, by pressing the TIMER/CLOCK button once.
`` You can also use [ or ] on the top panel instead of _ or +buttons in step 3,4.
04 Basic Functions