Timer Function
The timer enables you to switch the system on or off at specific times automatically.
`` Before setting the timer, check that the current time is correct.
`` For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
`` If you no longer want the system to be switched on or off automatically, you must cancel the timer by pressing TIMER ON/OFF button.
Example: You wish to wake up to music every morning.
1.Switch the system on by pressing the POWER button.
2.Press the TIMER/CLOCK button and then press _ or + buttons until 
TIME is displayed.
3.Press the ENTER ( 
) button.
Result: ON is displayed for a few seconds,you can set the timer
4.Set the timer switch-on time.
aPress the _ or + button.
bPress the ENTER ( 
) button. Result: The minutes flash.
cPress the _ or + button.
dPress the ENTER ( 
) button.
Result: OFF is displayed for a few seconds, you can now set the timer
5.Set the timer switch-off time.
aPress the _ or + button.
bPress the ENTER ( 
) button. Result: The minutes flash.
cPress the _ or + button.
dPress the ENTER ( 
) button.
Result: VOL XX is displayed, where XX corresponds to the volume already set.
6.Press _ or + button to adjust the volume level and press the ENTER ( 
) button.
Result: The source to be selected is displayed.
7.Press the _ or + button to select the desired source to be played when the system switches on.
`` FM (radio) : a Press the ENTER ( 
) button.
b Select a preset station by press the _ or + button.
`` DVD/CD : Load one Audio disc.
`` USB : Connect the USB device.
8.Press the ENTER ( 
) button.
Result: CHKREC (Do you want to record?) is displayed.
9.Press the ENTER ( 
) button.
Result: REC N is displayed, you can press the _ or + button to select the REC Y or REC N, and then press ENTER button.
1). If you select the REC N, it will cancel tuner timing recording even if you have already set the tuner timing recording.
2). If you select the REC Y, you can set the tuner timing recording.
a.Press the ENTER ( 
) button.
Result: ON is displayed for a few seconds, you can set the tuner timing recording
b.Press the ENTER ( 
) button.
Result: OFF is displayed for a few seconds, you can set the tuner timing recording
✎✎NOTE
`` The maximal tuner timing recording time is 5 hours. `` If the timer switch on and off times are identical, the
word ERROR is displayed.
`` If the
`` If there is no disc or usb, when you select the “DVD/CD, USB, it will automatically change to “TUNER”.
`` If the auto timer is turned on, the DVD/CD or USB function may require an additional step to be activated depending on the disc (or device). So it is better for you to select the tuner
function instead.
Cancelling the Timer
After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you can cancel it.
1.To cancel the timer, press TIMER ON/OFF once.
Result: 
is no longer displayed.
2.To resume the timer, press TIMER ON/OFF again.
Result: 
is displayed again.
04 Basic Functions