Advanced Functions
5.To stop recording, press the STOP ( @ ) button and then automatically create and save as the MP3 file.
`` After the recording, a directory named “RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER RECORDING” or “AUX RECORDING” will be created in your device.
✎✎NOTE
`` Do not disconnect the USB or the AC Cord during the recording as this may cause file damage.
`` If you disconnected USB device during the recording, the main unit will be power off and you may not delete the recorded file, In this case, please connect the USB device to the PC and backup the USB data on the PC first and then format the USB device.
`` When the USB memory is not enough, it will be displayed “NOT ENOUGH MEMORY”.
`` The recording works if the USB device or the HDD is formatted in the FAT file system. (The NTFS file system is not supported.)
`` When you use CD high speed search function, the CD recording can’t work.
`` Sometimes, the recording time may be longer with some USB devices.
`` When the CD recording, the EQ functions can not work and automatically change to OFF.
`` When the CD recording, the REPEAT function can not work and automatically changes to OFF.
`` You can not record the radio when searching or no available frequencies in the Tuner mode.
`` Note that setting the input level too loud when recording music from an external device through the AUX and USB channel may introduce noise into the recording. In that case, lower the external device’s volume level.
Recording Speed
1.Each time you press the CD REC SPEED button on the remote control, the recording speed will change as follows:
RECORD SPD x 1RECORD SPD x 3
`` While the Tuner or External Source is recording, the recording speed is not supported.
`` When you select RECORDSPD x 3, the audio sound will not be output.