Bluetooth

Basic Functions

4.Press the ENTER button on the remote control.

The selected file will be deleted. ☛☛The NTFS file system is not supported.

To skip next 10 files

1.Press the +10 or -10 button while in playback mode. The unit will skip as many as 10 tracks forward or 10 tracks back from the current track.

Move FOLDER

Press the remote control's TUNING/ALBUM ,,. button or the product's FOLDER -, + button to move to the

previous/ next folder.

How to safely remove the USB device

1.Press the (@) button twice while the USB is playing or press the (@) button once when play is stopped.

2.When the REMOVE message appears on the display, remove the USB device.

Read Before Using the USB Storage Devices

•Some USB devices may not work properly with this product.

•This product only supports external HDD`s that are formatted in FAT file system.

•USB 2.0 HDDs should be connected to a separate power source. Otherwise, the USB 2.0 HDDs will not work.

•If multiple USB external storage are connected together, only the MP3 files in the first HDD will be played.

•Files with DRM are not supported. Digital Right Management(DRM) restricts unauthorized access to a DRM file so that the copyright of the file is protected from piracy.

•Even if a file has an .mp3 extension, the file cannot be played if it is formatted in MPEG layer 1 or 2.

•Do not use an unrecognized USB hub.

•Only the first 15 characters of a MP3/WMA file are displayed.

•Only removable HDDs with less than 160GB are supported. Depending on the device, a 160GB- or more removable HDD may not be supported.

•It can take several minutes for the product to recognize the files on some USB devices.

•Some USB devices (USB HDDs, in particular) may cause a delay when moving from track to track.

•With USB storage devices supporting USB VER1.1 only, the product may access files slowly or may not recognize the file properties.

•The maximum electrical current supported by an external USB devices via each USB port is 0.5A (based on DC 5V).

•If there is no USB connection or STOP mode lasts for more than 25 minutes, the product will automatically turn off.

•A certain USB, digital camera device, USB card reader, iPod, iPhone or Smart Phone may not be supported.

You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a technology that enables Bluetooth compliant devices to interconnect easily with each other using a short wireless connection.

•A Bluetooth device may cause noise or malfunction, depending on usage, when:

-- A part of your body is in contact with the receiving/ transmitting system of the Bluetooth device or the Hi-Fi Component.

-- It is subject to electrical variation from obstructions caused by a wall, corner, or office partitioning.

-- It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs.

•Pair the Hi-Fi Component with the Bluetooth device while they are close together.

•The greater the distance between the Hi-Fi Component and the Bluetooth device, the worse the quality. If the distance exceeds the Bluetooth operational range, the connection is lost.

•In poor reception-sensitivity areas, the Bluetooth connection may not work properly.

•The Bluetooth connection only works when it is close to the set. The connection will be automatically cut off if the Bluetooth device is out of range. Even within range the sound quality may be degraded by obstacles such as walls or doors.

•This wireless device may cause electric interference during its operation.

To connect the Hi-Fi Component to a Bluetooth device

Before you begin, confirm that your Bluetooth device supports the Bluetooth-compliant stereo headset function.

1.Press the CD/ Bluetooth button of the Hi-Fi Component to display the BLUETOOTH message.

•You will see WAIT for a while and then READY on the front display of the Hi-Fi Component.

2.Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's user manual.)

3.Select the Stereo headset menu on the Bluetooth device.

•You will see a list of scanned devices.

4.Select "[Samsung] HI-FI XXXXXX" from the list.

•When the product is connected to the Bluetooth device, it will display CONNECTED ➞ BLUETOOTH on the front display.

Samsung MX-FS8000/UM manual Bluetooth