Advanced Functions
• The WMA/MP2 file just can be copied not recorded.
•Do not disconnect the USB device or the AC Cord during recording. You can cause file damage.
•If you disconnected the USB device during recording, the product will turn off and you will not be able to delete the file that has been recorded. If his occurs, connect the USB device to a PC, back up the USB data to the PC, and then reformat the USB device.
•If the USB device does not have enough memory, “NOT ENOUGH MEMORY” will appear on the display.
•The Recording function supports the FAT file systems only. The NTFS file system is not supported.
•When you use the CD high speed search function, the CD recording function is unavailable.
•With some USB devices, recording time may be longer.
•In the Program mode, you can't use the CD recording function.
•When the Recording function is active, the EQ and GIGA SOUND functions automatically turn off and are unavailable.
•During a CD recording, the REPEAT function automatically turns off and is unavailable.
•If you use the MIC function during a CD recording, the voice from the microphone will be recorded.
•You can not record audio from the radio when searching for a station or if there are no frequencies available when the product is set to Tuner mode.
•Note that setting the input level too loud when recording music from an external device through the AUX or USB channel may introduce noise into the recording. If this case, lower the external device’s volume level.
Recording Speed
Each time you press the CD REC SPEED button on the remote control, the recording speed will change as following:
RECORD SPEED x 1 ; RECORD SPEED x 4
•While the tuner or external source is recording, the recording speed does not supported.
•When you select RECORD SPEED x 4, the audio sound will not be output.
•If you connected the microphone, you just have one recording speed mode: RECORD SPEED x 1.
•During recording, if you disconnect the microphone, the recording will stop, even if you reconnect the microphone, it will still stop.
Special Sound Effect
Selecting EQ Mode
Your
1.Press the EQ button.
Each time you press this button, the sound mode will . switch as follows:
OFF;FLAT;ARABIC MUSIC;PERSIAN MUSIC; PARTY;POP;HIP HOP;ROCK;JAZZ;CLASSIC ;ELECTRONIC;MP3 ENHANCER;VIRTUAL SOUND;USER EQ
2.To set the BASS, MID (Middle) and TREB (Treble) levels manually, select USER EQ, and then press the ENTER button.
Result: The BASS level (left numeric) flashes.
Press the TUNING/ALBUM , or . button to select a level from
Then, press the ENTER button.
Result: The MIDDLE level (middle numeric) flashes. Press the TUNING/ALBUM , or . button to select a level from
Then, press the ENTER button.
Result: The TREBLE level (right numeric) flashes. Press the TUNING/ALBUM , or . button to select a level from
Then, press the ENTER button. Result: Setting is complete.
• When the
•If no buttons are pressed within 8 seconds, your settings will automatically be cancelled and the previous settings will be saved.
•The EQ mode may be different depending on your region.
Using the FOOTBALL Mode
The football mode brings greater realism to sports broadcasts.
1.Press the FOOTBALL MODE button on the product.
Each time you press the button, the sound mode will switches as follows:
FOOTBALL OFF ; FOOTBALL MODE 1 ; FOOTBALL MODE 2
•The FOOTBALL mode may be different depending on your region.
GIGA SOUND Function
The GIGA SOUND function amplifies the bass sound and provides twice the bass for powerful, realistic sound.
1.Press the GIGA SOUND BEAT button on the main unit or the GIGA button on the remote control. Each time you press the button, the sound mode switches as follows:
GIGA SOUND BEAT ; GIGA SOUND OFF
2.To cancel this function, press the GIGA SOUND BEAT button until the “OFF” is displayed.
•The GIGA SOUND mode may be different depending on your region.