Advanced Functions
BEAT WAVING Function
The Beat Waving function lets you change the Speaker LED display mode.
1.Each time you press the BEAT WAVING button on the product, the Speaker LED display mode changes as follows:
PARTY 1 ; PARTY 2 ; FUN 1 ; FUN 2 ; PURE ;
FRESH ; LOVE ; JOY ; SUNSET ; SUNRISE ; NATURE 1 ; NATURE 2 ; WAVE 1 ; WAVE 2 ;
AURORA ; OFF
•If you select the BEAT WAVING OFF, all of the speaker LED displays are turned off.
DJ BEAT Function
The DJ Beat function lets you turn on the FLANGER, PANNING, CHORUS, and WAHWAH sound effect functions. The level of each effect is adjustable.
☛☛The set scope is [-15 ~ +15] and the initial set up value are all 0.
FLANGER : Creates a vibration similar to the sound of a jet engine revving up and down.
PANNING : Increases the left and right speaker's output in turn and makes it seem as if the sound is moving from side to side.
WAHWAH : Creates a 'Wah~ Wah~’ effect.
CHORUS : Creates a vibration that sounds like a singing chorus.
1.To set the desired effect, press the FLANGER, PANNING, CHORUS, or WAHWAH button on the product.
•The red LED turns on around the button you pushed and around the DJ BEAT button.
•You can control the intensity of the effect with the Volume Jog. To control the volume, press the product's DJ BEAT button.
•To cancel an effect, press the effect's button again.
•To change to a different effect, press another effect button.
•You can apply the PANNING effect to the FLANGER, CHORUS, or WAHWAH effects.
•To apply the PANNING effect to another effect, press the PANNING button when the other effect is active or press another effect button when the PANNING effect is active.
•Use the Volume JOG to control the intensity of the effect that was activated last. For example, if you activated the WahWah effect and then the Panning effect, the Volume Jog will control the Panning effect.
•To control the intensity of the effect you applied first, press the button of effect that you applied last to turn it off. Then, you can use the Volume Jog to control the intensity of the first effect.
Booting Sound Function
When the Booting Sound Function is on, your
boots up.
1.Press the product's GIGA SOUND BEAT button or the remote control's GIGA button for ten seconds. The BOOTING SOUND menu appears on the display panel.
2.Press the product's GIGA SOUND BEAT button or the remote control's GIGA button for a ten seconds to turn the BOOTING SOUND function On or Off.