Before you start
Initial settings
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty before running Calibration.
1.Power off, and then power on the washing machine.
2.Hold down Temp. and Delay End simultaneously for 3 seconds to enter Calibration mode. The “CB” message appears.
3.Press Start/Pause to run the Calibration cycle.
4.The drum will rotate clockwise and
5.When the cycle is complete, “0” appears on the display and the washing machine will turn off automatically.
6.The washing machine is now ready for use.
Before you start
English 25
2017/2/22 15:21:55