Troubleshooting
Troubleshooting Troubleshooting
Problem |
| Action | |
|
| ||
| Check the drain hose. | ||
LC | • Make sure the end of the drain hose is placed on the floor. | ||
• | Make sure the drain hose is not clogged. | ||
| |||
| • If the information code remains, contact a customer service | ||
|
| centre. | |
|
| NOTE | |
LC1 |
| When the washer displays the “LC/LC1” code, the washer do | |
| draining for 3 minutes. During this time, the Power button is | ||
|
| ||
|
| inoperative. | |
|
| ||
| Spinning does not work. | ||
| • Make sure laundry is spread out evenly. | ||
UB | • Make sure the washing machine is on a flat, stable surface. | ||
• | Redistribute the load. If only one item of clothing needs | ||
|
| washing, such as a bathrobe or pair of jeans, the final spin | |
|
| result might be unsatisfactory, and an “UB” check message | |
|
| will be shown in the display. | |
|
| ||
| Check the motor for operation. | ||
3C | • Try restarting the cycle. | ||
• | If the information code remains, contact a customer service | ||
| |||
|
| centre. | |
|
| ||
| The electronic control needs to be checked (Over Voltage Error). | ||
| • Check the PCB and wire harness. | ||
| • Check if power is supplied properly | ||
| • If the information code remains, contact a customer service | ||
UC |
| centre. | |
| Low voltage detected. | ||
| • Check if the power cord is plugged in. | ||
| • If the information code remains, contact a customer service | ||
|
| centre. | |
|
| ||
| High temperature heating check. | ||
HC | • | If the information code remains, contact a customer service | |
|
| centre. | |
|
|
| |
54 English
2017/2/22 15:21:59