Installation
Installation
7. If you are using a screw type of water tap, use the provided
8. Connect the other end of the water supply hose to the inlet valve on the back of the washing machine. Turn the hose clockwise to tighten.
9. Open the water tap and check if there are any leaks around the connection areas. If there are water leaks, repeat the steps above.
WARNING
Stop using the washing machine if there is a water leak, and contact a local Samsung service centre. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water supply hose by force. If the hose is too short, replace the hose with a longer,
22 English
2017/2/22 15:21:55