Samsung WA90F3S1/XST, WA90F3Q3DW/YL, WA95F3B3EW/XSG, WA98F3VEC/XSV, WA90F3Q3EW/YAM Washing Procedure

Page 6

WASHING PROCEDURE

Before starting washing, check the following;

Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose. (In case no drain pump)

FUZZY COURSE

Selects the best washing course POWER

START/

HOLD

automatically.

 

1.Press the POWER Button to"ON".

2.Press the START/HOLD button.

Water level is selected automatically. Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

3.Close the lid.

POWER

COURSE

START/

HOLD

BLANKET COURSE

 

 

 

1.Press the power button to "ON".

2.Press the course select button once.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

4.Close the lid.

ECO COURSE POWER COURSE START/

HOLD

1.Press the power button to "ON".

2.Press the course select button two times.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused. 4. Close the lid.

POWER

COURSE

START/

HOLD

SPEEDY COURSE

 

 

 

Because washing is speedy, it is

 

 

good for light or less stained laundry.

 

 

1.Press the power button to "ON".

2.Press the course select button three times.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused. 4. Close the lid.

Put the laundry into the washer and add detergent, too. Be careful not to overload. Use right detergent

for the fabrics you are washing.

WOOL COURSE

POWER

COURSE

START/

HOLD

 

 

 

1.Press the power button to "ON". 2.Press the course select four times. 3.Press the START/HOLD button.

Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused. 4. Close the lid.

CAUTION . . .

-Do not use water above 30˚C for WOOL washing. -Refer to the tag attached on the clothes for washing information.

-Fasten buttons and turn inside out before washing. -Use the detergent indicated in the laundry.

-When the degree of dirt is extreme, soak the laundry in warm water for about 10 minutes before pressing the WOOL course button in order to enhance washing efficiency.

DELAY START

POWER

COURSE

DELAY

START/

START

HOLD

 

 

Select this course when you have to go out or do something else.

1.Press the power button to "ON".

2.Press the course select button.

3.Press the DELAY START button once.

You may change the delay start time with

use the DEALY START button. (from 3 hours to 18 hours)

4.Press the START/HOLD button and put

the proper amount of detergent into tub.

5.Close the lid.

The washing finishes by the time you reserved.

SUPER CLEAN

POWER

SUPER

START/

CLEAN

HOLD

 

 

Use for cleaner washing.

1.Press the power button to "ON".

2.Press the SUPER CLEAN button.

3.Press the START/HOLD button and put the proper amount of detergent into tub.

Water level is selected automatically.

Water level is only selected MAXIMUM ~ MEDIUM.

4.Close the lid.

The washing finishes by the time you reserved.

5

Image 6
Contents Manual Functions Installation & Maintenance Troubleshooting SpecificationsCode NO. DC68-02040A Features Super CleanCHILD-LOCK Function Safety Instructions Filter Adjust the length of the legs when installing the washerSpin Basket Power Cord Ground Lead LIDControl Panel Washing Procedure Soak & WASH+ Function Manual FunctionsWASH+ Function Soak FunctionWash and Rinse Rinse onlySpin only Rinse and SpinInstallation & Maintenance Connecting the Water Supply HoseEnvironment HOW to ADD the Fabric Softener Connecting the Drain HoseHOW to PUT the Detergent Assembling the RAT Protection PanelWater Supply Connector Filter HOW to Clean the FilterPump drained washer Is the water tap opened? TroubleshootingIs the washer plugged in? Washer? Is the power cut off? Is there enough water? Flat surface?Specifications Case the Need for Servicing Arises
Related manuals
Manual 28 pages 10.94 Kb Manual 15 pages 58.18 Kb