•• When connecting the Invisible Connection, use a Bending Cover to prevent the cable of the Invisible Connection from being bent at a 90 degree angle. Failure to do so may cause damage to the cable.
•• When connecting the Invisible Connection, pay attention to the shapes of its connectors so that they are connected correctly. Failure to do so may cause product malfunction.
•• After connecting the Invisible Connection, wind the remaining cable around the Invisible Connection tube. Just winding or leaving the remaining cable as it is may cause damage to the cable.
•• When connecting the Invisible Connection, be careful not to twist the cable of the Invisible Connection. Failure to do so may cause performance degradation to the TV or damage to the cable.
•• Be careful not to take the following actions to prevent the Invisible Connection from being damaged:
Bending | Twisting | Pulling | Stepping on | Pressing on |
CLASS 1 LASER PRODUCT
•• Caution - Invisible laser radiation when open. Do not stare into beam.
•• Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
English - 8