Samsung UA40H6300AWXSQ manual Connecting to a TV Viewing Card slot, Using the CI or CI+ Card

Connecting to a TV Viewing Card slot

"" Availability depends on the specific model and area.

To connect the CI CARD, follow these steps:

A CI Card Adapter that lets the TV use two different CI Cards is available, depending on the model.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

"" Turn the TV off to connect or disconnect a CI card.

●● If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.

●● The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message appears please contact your service provider.

●● When the configuration of channel information has finished, the message “Updating Completed” appears indicating the channel list is updated.

Requirements:

●● You must obtain a “CI or CI+ CARD” from a local cable service provider.

●● When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

●● Insert the “CI or CI+ CARD” in the direction marked on the card.

●● The location of the COMMON INTERFACE slot may be different depending on the model.

●● “CI or CI+ CARD” is not supported in some countries and regions; check with your authorised dealer.

●● If you have any problems, please contact a service provider.

●● Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.