Important notes
Be sure to observe the following precautions!
❾✃ This unit contains precision electronic components. Do not use or store this unit in the following locations.
-Areas exposed to severe changes in temperature and humidity.
-Areas exposed to dust and dirt.
-Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
-Environments where there is high magnetism or excessive vibration.
-Areas with high explosives or highly flammable materials.
❾✃ Do not let the unit come into contact with dust, vinyl goods, or chemicals, such as insecticides, for an extended period of time.
❾✃ Sand can be particularly troublesome to cameras.
-Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areas where there is lots of sand.
-Doing so may result in failure or may permanently render the unit unusable.
❾✃ Extremes in temperature may cause problems.
-If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.
❾✃ Caution on Using the Lens
-If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor.
-Pay attention not to get fingerprints or foreign substances on the surface of the lens.
❾✃ If the digital camera is not used for a long period, an electric discharge can occur.
It is a good idea to remove the batteries and the memory card if you do not intend using the camera for an extended period of time.
❾➓86❾➔