Things to Watch Out for When Taking Pictures
❾✃ Pressing the shutter button down half way
Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture.
[ Lightly press the shutter button ] | [ Press the shutter button ] |
❾✃ The available recording time may vary depending on shooting conditions and camera settings.
❾✃ When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera
shake warning indicator ( 
) may appear on the LCD monitor. In this case, use a tripod, support the camera on a solid surface or change the flash mode to flash shot mode.
❾✃ Backlight compensated shots: When taking an outdoor shot, avoid facing the sun, as the image may be dark because of the strong backlight. To take a picture against the sun, please use the [BACKLIGHT] in the scene shooting mode (see page 49),
❾✃ Avoid obstructing the lens or the flash when you capture an image.
❾✃ As there can be some differences between what is seen through the Viewfinder and the resulting image when taken at a range closer than 1.5m, it is recommended that you use the LCD monitor to compose these shots.
❾✃ Using the LCD monitor extensively will drain the batteries.
We recommend turning off the LCD monitor and using the optical viewfinder as often as possible in order to extend battery life.
❾✃ Under certain conditions the auto focus system may not perform as expected.
-When photographing a subject that has little contrast.
-If the subject is highly reflective or shiny.
-If the subject is moving at high speed.
-When there is strong reflected light, or when the background is very bright.
-When the subject matter has only horizontal lines or the subject is very narrow (such as a stick or flagpole).
-When the surroundings are dark
❾➓25❾➔