Samsung EC-A7ZZZSBA/E1 Zoom W/T button, Subject will appear nearer, Digital zoom Tele, Zoom bar

Page 27

ZOOM W/T button

❾➴ This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X.

❾➴ TELE Zoom

 

Optical zoom TELE

: Pressing the ZOOM T button. This will zoom into the subject i.e.

 

 

 

the subject will appear nearer.

Digital zoom TELE

: When the maximum (3X) optical zoom is selected, pressing the

 

 

 

ZOOM T button activates the digital zoom software. Releasing

 

 

 

ZOOM T button stops the digital zooming at the required setting.

 

 

 

Once the maximum digital zoom (5X) is achieved, pressing the

 

 

 

 

 

 

ZOOM T button will have no effect. You can check the digital

 

 

 

 

 

 

zoom rate with the [X1.1 ~ X 5.0] numerical mark next to the

 

 

 

zoom bar.

Pressing the ZOOM T button

Pressing the ZOOM T button

[WIDE zoom]

[TELE zoom]

[Digital zoom 2.0X]

❾➴ WIDE Zoom

Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.

Pressing the ZOOM W button

Pressing the ZOOM W button

[TELE zoom]

[Optical zoom 2X]

[WIDE zoom]

Digital zoom WIDE

Optical zoom

Digital zoom

:When the digital zoom is in operation, pressing the ZOOM W button will reduce the digital zooming in steps.

Releasing ZOOM W button stops digital zooming. Pressing the ZOOM W button will reduce the digital zoom and then it will continue to reduce the optical zoom until the minimum setting is reached.

Pressing the

Pressing the

ZOOM W button

ZOOM W button

[Digital zoom 5.0X]

[Digital zoom 2.0X]

[TELE zoom]

❾➓27❾➔

Image 27
Contents English Instructions Contents ❾DPOF Standard ❾DPOF Cancel❾FAQ ❾DPOFGetting to know your camera About the iconsThank you for buying a Samsung Digital Camera ❾➓6❾ ➃Do not insert the batteries with the reverse polarities An FCC warningCR-V3 System chartBattery Pouch Camera strapOr the external devices may not recognise the camera ComputerSee p.94 System RequirementsUSB Identification of featuresFront & Top Back & BottomMenu Mode dialSide/ 5-function button Flash❾ AS mode ❾ M mode Snow Auto ProgramPlay SceneConnecting to a Power Source Important information about battery usageNi-Cdover 1000mAh ❾➓15❾ Instructions on how to use the memory card Fine 3072 2816 2592 2272 2048 1600 1024 640 320Removing the memory card Inserting the memory cardAEB LCD monitor indicatorPress the shutter button to capture an image Starting the recording modeSelect the Auto mode by rotating the mode dial ISO❾ How to use the AS mode Starting the recording modeUse the ASM, Up/Down/Left/Right buttons to select Aperture Aperture and Shutter can be set manually in this modeSteps from 1-4 are the same as those for Auto mode Select the M mode by rotating the mode dialRecording time will display on the LCD monitor For as long as the available recording time❾➓24❾ ❾ Pressing the shutter button down half way Things to Watch Out for When Taking PicturesZoom W/T button Using the camera buttons to adjust the cameraZoom bar Zoom W/T buttonSubject will appear nearer Digital zoom TeleVoice memo / UP button Voice memo / UP button Macro / Down buttonFocusingFocus lock Macro / Down buttonFocusing~3.0 ~2.0 25~0.8 Flash / Left buttonUnit m Autofocus Macro Wide TeleEye reduction function ❾ Flash mode indicator Icon Description❾ Available flash mode, by recording mode AutomaticallySelf-timer / Right button ❾ The default is OFFSeconds before the image is taken ❾ Menu button MENU/ OK buttonISO sensitivity value Sub menu Available camera mode+/- button ISO menu bar Will appear as shownCustom DaylightCloudy TungstenValue, the exposure indicator ShownNegative exposure compensation value reduces the exposure ASM buttonManual & Scene mode button Shutter Speed Slow FastLCD button Size Using the LCD monitor to adjust the camera settingsMYSET3 Metering Multi Spot SingleEffect Sepia MYSET1 Myset MYSET2How to use the menu SizeUse the UP and Down buttons to select a sub menu Size QualityAvi Continuous shot MeteringRGB Continuous shotEffect Fine NormalVivid EffectSharpness SoftPress the Left/Right buttons to select the Myset Menu tapPress the right button Fireworks SceneChildren TextStarting play mode Voice file, the voice indicator Will be displayed on Date Flash OFFThumbnail / Enlargement button Cancel Voice memo/ Up buttonTrim Temporarily stops playback Pause mode Resumes playbackVoice memo/ Up button Play & Pause / Down buttonLEFT/ RIGHT/ MENU/ OK button ButtonPressing the LCD Delete button If Cancel is selected cancels Delete ImageProtect ONE PIC Setting up the play back function using the LCD monitorSlide Repeat ResizeSelect PrintIndex Dpof Print Custom SET ResetType PhotoPress the LEFT/ Right button and select the Slide menu tab Press the OK button to save the configurationStarting the slide show ❾ Images can be displayed continuously at pre-set intervalsRotating an image HorizontalVertical Resize ❾ Image Resize TypesLogo Protecting images UnlockLock Dpof Deleting all imagesPress the LEFT/ Right button and select the Dpof menu tab Button and press the Right buttonIf no is selected The image will not be printed Select a desired sub menu by pressing the UP/ Down ❾ Setting the Print SizeSelect the Cancel menu by pressing the UP/ Down Cancels the standard print settingLEFT/ Right button Copy to CardDpof Auto Print Printer SetupPictBridge ImagesPictBridge Picture Selection PictBridge Printing StandardIs printed on one piece of paper AUTO, OFF, on PictBridge Print Setting❾ Auto SET AUTO, DRAFT, NORMAL, FineIf no is selected Settings will not be reset PictBridge ResetSetup menu All pictures File name3SEC SeriesAuto power off File nameSpecified Language Select the Language menu by pressing the UPDown button and press the Right button No IMAGE! message will appear Formatting a memory cardDate type Setting up the Date/ TimeTime Imprinting the recording dateFunction lamp Only the Date will be imprinted on the image fileSound Function lampLCD brightness Selecting an External Device USBInitializationRESET ALL Quick view❾ Initializing the Camera Start up image Setting up the Mycam menuStart up sound Shutter soundImportant notes ❾➓87❾ Card Full Card ErrorFile Error LOW BatteryBefore contacting a service center Flash range Symptom Causes RemedyClean the lens Operate Card error hasCamera is off Turn the camera on When using AC adapter is not ConnectedInstall Windows 98, 98SE, 2000, ME Check the connectionSpecifications Special Features Digital output connector USBInterface Audio Mono DC power input connector Dimensions WxHxD 109.8 x 56.8x 34.1 mm WeightSetup menu File name File name Language Formatting a memory card Setting up the Date/ Time Imprinting the recording date Function lamp Selecting an External Device USB Quick view Setting up the Mycam menu Shutter sound Important notes ❾➓87❾ ❾➓88❾ Before contacting a service center ❾➓90❾ ❾➓91❾ Specifications ❾➓93❾ System Requirements Software NotesAbout the software Setting up the application software ❾➓97❾ Frame 8 may not appear according to System requirements Select Components window will appear. Click Next button ❾➓100❾ ❾➓101❾ Starting PC mode Cut ❾➓104❾ Removing the USB Driver for Windows 98SE Removable Disk Removing the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACWeb album etc Digimax ViewerProperty Print, Slide show, Export, Sending e-mail, On-line printUsing PhotoImpression FAQ → Device Manager → Universal Serial Bus controllers FAQ❾➓113❾ Type regsvr32 /u m3jpgdec.ax and press the Enter key Memo 6806-2530
Related manuals
Manual 116 pages 11.93 Kb Manual 116 pages 14.84 Kb Manual 116 pages 14.98 Kb